How to free up the HD1 physical disk space ?
Hello Experts , How to free up the HD1 disk space ? We have 2 volume HD1.1 and HD1.2 , to create a new volume how much free space is required ? How can we free up the space for the same ? Hardware Version Information Name HD1 Type physical-disk Model WDC Parameters -- -- SerialNumber WD-WM Size 465.76G Firmware Version 01.01S03 Media Type HDD --- Volume group --- VG Name vg-db-sda System ID Format lvm2 Metadata Areas 1 Metadata Sequence No 127 VG Access read/write VG Status resizable MAX LV 0 Cur LV 13 Open LV 8 Max PV 0 Cur PV 1 Act PV 1 VG Size 465.75 GiB PE Size 4.00 MiB Total PE 119233 Alloc PE / Size 116260 / 454.14 GiB Free PE / Size 2973 / 11.61 GiB VG UUID NRa4BZ-TYJm-gTFW-AVO3-7bEd-Evpj-lqgYbW LV VG Attr LSize Pool Origin Data% Meta% Move Log Cpy%Sync Convert dat.appdata vg-db-sda -wi-ao---- 357.25g dat.boot vg-db-sda -wi-a----- 468.00m dat.log vg-db-sda -wi-ao---- 21.02g dat.share vg-db-sda -wi-ao---- 42.03g dat.swapvol vg-db-sda -wi-ao---- 5.00g set.1._config vg-db-sda -wi-a----- 3.17g set.1._usr vg-db-sda -wi-a----- 6.09g set.1._var vg-db-sda -wi-a----- 4.50g set.1.root vg-db-sda -wi-a----- 440.00m set.2._config vg-db-sda -wi-ao---- 3.17g set.2._usr vg-db-sda -wi-ao---- 6.09g set.2._var vg-db-sda -wi-ao---- 4.50g set.2.root vg-db-sda -wi-ao---- 440.00m
F5 ASM upgrade
As it is aware that version (BIG-IP 15.1) of the existing software used on our F5 devices ( i2600 ) will expire after year 2024. We are planning software upgrade to keep equipment in our environment are actively supported by product vendor. When checking from F5 web site, there are two upstream version 16.1 and 17.1 respectively. I would like to check ( in terms of viability and stability and the support of JSON format for ASM policies ), may I know which version (16.1 or 17.1) would be recommended? Thanks.
BIG-IP : upgrade fails to transfer configuration
BIG-IP 11.4.0 Build 2384.0 Final I want to upgrade to 11.4.1 retaining current configuration. I downloaded BIGIP-11.4.1.608.0.iso and uploaded to BIG-IP and installed to volume HD1.2 ( HD1.1 has 11.4.0 ). System > Software Management : Boot Locations I select HD1.2 , set Install Configuration to Yes , set Source Volume = "HD1.1:11.4.0" , and click Activate However on reboot the message is displayed : The configuration has not yet loaded. If this message persists, it may indicate a configuration problem.
Trying to upgrade the lab enviroment, from 10.1.0.3341.0.1 to 11.5.3.0.0.163
Hi, Im trying to upgrade our lab enviroment from 10.1.0.3341.0.1 to 11.5.3.0.0.163, but its failing and i cannot figure out why. root@lb01a(Active)(tmos) / sys software status root@lb01a(Active)(tmos.sys.software.status) show Sys::Software Status Volume Product Version Build Active Status -------------------------------------------------- HD1.1 none none none no complete HD1.2 BIG-IP 10.1.0 3341.0 yes complete root@lb01a(Active)(tmos) install sys software image BIGIP-11.5.3.0.0.163.iso volume HD1.1 root@lb01a(Active)(tmos) show sys soft status Sys::Software Status Volume Product Version Build Active Status ---------------------------------------------------------------------------------- HD1.1 BIG-IP 11.5.3 0.0.163 no failed (Can't find requested disk HD1.) HD1.2 BIG-IP 10.1.0 3341.0 yes complete MD5 checksum is OK. The same happens when i try to go via the webgui... Any ideas? I cant figure this one out. Regards, Rikard
Volume Management
Hello Guys, I will install a HF2 to my current version 11.6.1 however we didn't have 11.6.1 base image in any other slot except the current boot location - MD1.1. In this I would like to remove the Oldest version 10.2.4 in our boot location which is MD1.2 can I just easily click install the 11.6.1 version and choose MD1.2 to overwrite the 10.2.4 in slot MD1.2? BIG-IP 11.6.1 0.0.317 MD1 MD1.1 Yes Yes array complete BIG-IP 10.2.4 655.0 MD1 MD1.2 No No array complete BIG-IP 11.6.0 5.0.429 MD1 MD1.3 No No array complete BIG-IP 11.6.0 4.0.420 MD1 MD1.4 No No array complete Thank you!
Upgrade to BIP-IP V11.6.0 hanging
Hi, I am looking to upgrade to the latest release of firmware. I have an F5 1600 appliance which is part of an active/standby device group. It is currently running 11.4.1 HF8. I installed 11.6.0 on a spare partition and booted into this (installing our configuration), and the GUI does not return. In /var/log/ltm I see repeatedly: Jul 27 09:17:11 longgos-dc-comm-lb-bip-02a notice mcpd[5455]: 01071431:5: Attempting to connect to CMI peer 10.200.11.45 port 6699 Jul 27 09:17:11 longgos-dc-comm-lb-bip-02a err mcpd[5455]: 0107142f:3: Can't connect to CMI peer 10.200.11.45, TMM outbound listener not yet created 10.200.11.45 is the configsync address configured for the other device in the HA cluster. Are there any significant changes in the way clustering works between 11.4.1 --> 11.6.0? I read the upgrade notes for 11.6.0 and couldn't see anything... Thanks, Damian
