New i2800 to Cisco 93180YC-FX3 Twinax
I've seen older post and I've used these before but cannot get them working now. Does anyone know if you can still use the Cisco Twinax cables (SFP-H10GB-CU3M)? My F5 is showing the following: Net::Interface Name Status Bits Bits Pkts Pkts Drops Errs Media In Out In Out --------------------------------------------------------------- 1.0 up 0 0 0 0 0 0 1000CX-FD 2.0 miss 0 0 0 0 0 0 none 3.0 miss 0 0 0 0 0 0 none 4.0 miss 0 0 0 0 0 0 none 5.0 down 0 0 0 0 0 0 none 6.0 down 0 0 0 0 0 0 none mgmt up 20.2G 6.2G 1.7M 670.7K 0 0 1000T-FD net interface 5.0 { if-index 352 mac-address 14:a9:d0:06:80:88 media-max 10000T-FD module-description "Unsupported Optic detected" mtu 9198 serial JPC23220CWT vendor CISCO-JPC vendor-oui 001897 vendor-partnum P3410UB03000-1 vendor-revision A0