Reselect member with new port
Hi, I am not sure if my rule is broken or there is some bug in v11.2.0 I have VS IP:8888 with pool containing members set to All ports IP:0 but backed server is listening on port 443. I need to change port from 8888 to 443 when connecting to backed server. I tired this iRule but always getting error like that: TCL error: /Common/http_to_https_one_vs - failed to find pool member (line 1) invoked from within "pool LAMP_110_all_pl member 10.128.30.110 443" when LB_SELECTED { pool LAMP_110_all_pl member 10.128.30.110 443 } I tried putting above command in HTTP_REQUEST event but error is the same. Tried to use /Common/LAMP_110_all_pl as well, no difference. However everything works OK when I switch to below code when LB_SELECTED { LB::reselect node 10.128.30.110 443 } I would prefer to use first one as second one seems to be messing up with LB a bit. By that I mean that before LB::reselect is used, LB::server name is returning /Common/PoolName 10.128.30.110 0 after reselect just 10.128.30.110 443 and in node command (don't know if it is realted to LB::reselect node as well) there is note: Since statistics and health monitoring are tied to pool membership, node status and statistics for this connection will not be available. So why pool LAMP_110_all_pl member 10.128.30.110 443 is returning error? Piotr
Reselect member with new port
Hi, I am not sure if my rule is broken or there is some bug in v11.2.0 I have VS IP:8888 with pool containing members set to All ports IP:0 but backed server is listening on port 443. I need to change port from 8888 to 443 when connecting to backed server. I tired this iRule but always getting error like that: TCL error: /Common/http_to_https_one_vs - failed to find pool member (line 1) invoked from within "pool LAMP_110_all_pl member 10.128.30.110 443" when LB_SELECTED { pool LAMP_110_all_pl member 10.128.30.110 443 } I tried putting above command in HTTP_REQUEST event but error is the same. Tried to use /Common/LAMP_110_all_pl as well, no difference. However everything works OK when I switch to below code when LB_SELECTED { LB::reselect node 10.128.30.110 443 } I would prefer to use first one as second one seems to be messing up with LB a bit. By that I mean that before LB::reselect is used, LB::server name is returning /Common/PoolName 10.128.30.110 0 after reselect just 10.128.30.110 443 and in node command (don't know if it is realted to LB::reselect node as well) there is note: Since statistics and health monitoring are tied to pool membership, node status and statistics for this connection will not be available. So why pool LAMP_110_all_pl member 10.128.30.110 443is returning error? Piotr