Configuration Assistance: Configure Email Alerts for HA Failover Events and Device Offline
We have a BIG-IP VE High Availability Pair deployed in Microsoft Azure. We need to configure the BIG-IP to automatically send an email notification to our Operations teams immediately when a Failover event occurs(When the unit goes from Active to Standby or Offline) Could you provide the recommended procedure for the configuration to trigger these email alerts?
Can SSL VPN client handle multiple simultaneous sessions?
From a single Windows machine, we have a need to have the F5 SSL VPN client connect both to multiple external organizations at once, and also to connect to single organizations by multiple tunnels, with separate credentials. If there's a way to do either of these, it's not obvious to us. It seems like only one SSL VPN client instance can run per machine, and that instance can only handle a single tunnel, with a single set of credentials, to a single remote location. It's testament to F5's market penetration that we find ourselves needing to do more than that. Is there a way? Thanks, Whit
LDAPS Monitor with Certificate Expiration
Hi Team, I have been working with my AD team trying to resolve a problem where they forget to update a Domain Controller certificate and it expires and ADLDAPS queries fail since they dont bind to expired certificates. They have requested to see if we can drop a member out of the pool if the certificate is expired ( ie, not a valid SSL cert ) I have been messing with the LDAP Health monitor, turning on the Security settings, but I dont believe this would actually check that a certificate is valid or not. I know with server side SSL configuration you can enable SSL authentication but would just stop traffic from flow, not actually drop a member out of the pool. Any ideas ?Problems load balancing printing
Followed this guide to configure load balancing MS printing with npath routing: http://blog.loadbalancer.org/load-balancing-microsoft-print-server/ The problem is when I try to connect to the printer with the FQDN of virtual server (eg. \\virtualserver.mydomain.com) I get the error "Operation could not be completed (error 0x00000709). Double check the printer name and make sure that the printer is connected to the network.". If I connect to the VIP (eg. \\192.168.0.10) it works fine. If I connect to the host directly (by hostname or IP) it works fine. Any ideas?
Outlook Client Prompting for Password
A few months ago we implemented Exchange 2010 with the help of our LTMs. However it has come to light that people have been complaining about how sometimes they are being prompted to log in after they've been logged in all day. What they don't understand is that when they switch between networks "Wired to wireless" or vice versa, their IP address changes so the CAS server they land on is likely different, prompting them to re-authenticate. I don't suppose there is an F5 solution to stop these password prompt. The best solution I came up with was to run Outlook anywhere and do the persistence based on cookies. Are there any other ideas out there?
Sharepoint 2010 Health Monitor
I have an HTTP GET health monitor setup for our Sharepoint 2010 servers. The health montior seems to work as I am seeing 200s come back from the server after authentication. However, what I'm also seeing is the health monitor sending along several GETs without the NTLM credentials and those come back with 401 authentication errors: Logs from Sharepoint server...top two are not successful as the LTM did not send along the credentials of PPL\spsearchqa. Bottom two are successful with the creds: 2015-04-24 13:48:04 xxx.xxx.xxx.xxx GET /sitepages/Home.aspx - 80 - xxx.xxx.xxx.xxx Mozilla/5.0+(Windows+NT+5.1;+rv:2.0.1)+Gecko/20100101+Firefox/4.0.1 401 2 5 5 2015-04-24 13:48:04 xxx.xxx.xxx.xxx GET /sitepages/Home.aspx - 80 - xxx.xxx.xxx.xxx Mozilla/5.0+(Windows+NT+5.1;+rv:2.0.1)+Gecko/20100101+Firefox/4.0.1 401 1 2148074254 5 2015-04-24 13:48:08 xxx.xxx.xxx.xxx GET /sitepages/Home.aspx - 80 PPL\spsearchqa xxx.xxx.xxx.xxx Mozilla/5.0+(Windows+NT+5.1;+rv:2.0.1)+Gecko/20100101+Firefox/4.0.1 200 0 64 12045 2015-04-24 13:48:14 xxx.xxx.xxx.xxx GET /sitepages/Home.aspx - 80 PPL\spsearchqa xxx.xxx.xxx.xxx Mozilla/5.0+(Windows+NT+5.1;+rv:2.0.1)+Gecko/20100101+Firefox/4.0.1 200 0 64 10075 Here is how my health monitor is setup: Any help would be very much appreciated. Thank you!Office 365 with APM as IdP (no ADFS), troubleshooting
hello, I have starting a non-hybrid deployment of Office365 with DirSync (sync is working). My domain is a subdomain in a forest. I followed the F5 deployment guide (manual config, no iApp) and have the office365 portal redirection to my IdP (APM 11.6 HF5) and the IdP redirection with assertion (which seems correct) to the Office 365 portal. But signon doesn't work and I get an error 80043431. Questions: cannot find Microsoft troubleshooting guides that do consider a deployment without ADFS. I would like to verify the SSO configuration of Office365 but the PS command Get-MsolFederationProperty -DomainName seem to work only with ADFS... get an error Get-MsolFederationProperty : Failed to connect to Active Directory Federation Services 2.0 on the local machine. Please try running Set-MsolADFSContext before running this command again. Does anyone knows a way to get the SSO configuration in a deployment without ADFS? has anyone gone through the same error and found the solution? Thanks AlexAPM : Radius and AD same logon page fail
Hi, based on the following article : https://devcentral.f5.com/questions/bigip-apm-ad-rsa-auth I'm trying to implement a single logon page with these 2 Authentication mode : "Radius" and "AD" (same login for both but not the same password) : Bellow a screenshot of my current VPE applied to my VS (OWA 2010) : Variable Assign - keep AD and RSA pwd : session.logon.last.password = Session Variable session.logon.last.token (unsecure) session.logon.temp.password = Session Variable session.logon.last.password (unsecure) Variable Assign AD pwd : session.logon.last.password = Session Variable session.logon.temp.password (unsecure) Unfortunately I always have the following errors message in my APM report : * RADIUS module: authentication with 'username' failed: Access-Reject packet from host IP-of-my-radius-server * RADIUS module: parseResponse():Access-Reject packet from host IP-of-my-radius-server:port Please help me !!!
