Investigating BIG-IP System Hardware Failure
Please, what can you make out of this log? I'm investigating a power unit failure. Thanks Dec 1 12:59:28 juliet crit chmand[6770]: 012a0013:2: Blade 0 hardware sensor critical alarm: : Bad Dec 1 12:59:28 juliet info chmand[6770]: 012a0006:6: Alert from sensor cha_spa3_pws_2: current reading 6 (.DA.), new actions: BROADCAST_MSG|BIGIP_ALARM_CRITICAL| Dec 1 12:59:28 juliet info chmand[6770]: 012a0006:6: Alert from sensor fan_system4: current reading 11619 (rpm), new actions: BROADCAST_MSG|BIGIP_NOMINAL_CONDITION| Dec 1 12:59:28 juliet info chmand[6770]: 012a0006:6: Alert from sensor fan_system1: current reading 11806 (rpm), new actions: BROADCAST_MSG|BIGIP_NOMINAL_CONDITION| Dec 1 12:59:28 juliet info chmand[6770]: 012a0006:6: Alert from sensor fan_system2: current reading 11619 (rpm), new actions: BROADCAST_MSG|BIGIP_NOMINAL_CONDITION| Dec 1 12:59:28 juliet info chmand[6770]: 012a0006:6: Alert from sensor fan_system3: current reading 11806 (rpm), new actions: BROADCAST_MSG|BIGIP_NOMINAL_CONDITION| Dec 1 12:59:29 juliet info chmand[6770]: 012a0006:6: Alert from sensor outlet_ic_temp: current reading 20 (C), new actions: BROADCAST_MSG|BIGIP_NOMINAL_CONDITION|SYSTEM_FANS_AUTO_LOW| Dec 1 12:59:30 juliet info chmand[6770]: 012a0006:6: Alert from sensor inlet_ic_temp: current reading 20 (C), new actions: BROADCAST_MSG|BIGIP_NOMINAL_CONDITION|SYSTEM_FANS_AUTO_LOW| Dec 1 12:59:30 juliet info chmand[6770]: 012a0006:6: Alert from sensor main_1.8vsb: current reading 1787 (mV), new actions: BROADCAST_MSG|BIGIP_NOMINAL_CONDITION| Dec 1 12:59:31 juliet info chmand[6770]: 012a0006:6: Alert from sensor main_1.2v: current reading 1201 (mV), new actions: BROADCAST_MSG|BIGIP_NOMINAL_CONDITION| Dec 1 12:59:31 juliet info chmand[6770]: 012a0006:6: Alert from sensor main_12vsb: current reading 11956 (mV), new actions: BROADCAST_MSG|BIGIP_NOMINAL_CONDITION| Dec 1 12:59:31 juliet info chmand[6770]: 012a0006:6: Alert from sensor main_1.5v_PCH: current reading 1494 (mV), new actions: BROADCAST_MSG|BIGIP_NOMINAL_CONDITION|
Investigating BIG-IP System Hardware Failure
Please, what can you make out of this log? I'm investigating a power unit failure. Thanks Dec 1 12:59:28 juliet crit chmand[6770]: 012a0013:2: Blade 0 hardware sensor critical alarm: : Bad Dec 1 12:59:28 juliet info chmand[6770]: 012a0006:6: Alert from sensor cha_spa3_pws_2: current reading 6 (.DA.), new actions: BROADCAST_MSG|BIGIP_ALARM_CRITICAL| Dec 1 12:59:28 juliet info chmand[6770]: 012a0006:6: Alert from sensor fan_system4: current reading 11619 (rpm), new actions: BROADCAST_MSG|BIGIP_NOMINAL_CONDITION| Dec 1 12:59:28 juliet info chmand[6770]: 012a0006:6: Alert from sensor fan_system1: current reading 11806 (rpm), new actions: BROADCAST_MSG|BIGIP_NOMINAL_CONDITION| Dec 1 12:59:28 juliet info chmand[6770]: 012a0006:6: Alert from sensor fan_system2: current reading 11619 (rpm), new actions: BROADCAST_MSG|BIGIP_NOMINAL_CONDITION| Dec 1 12:59:28 juliet info chmand[6770]: 012a0006:6: Alert from sensor fan_system3: current reading 11806 (rpm), new actions: BROADCAST_MSG|BIGIP_NOMINAL_CONDITION| Dec 1 12:59:29 juliet info chmand[6770]: 012a0006:6: Alert from sensor outlet_ic_temp: current reading 20 (C), new actions: BROADCAST_MSG|BIGIP_NOMINAL_CONDITION|SYSTEM_FANS_AUTO_LOW| Dec 1 12:59:30 juliet info chmand[6770]: 012a0006:6: Alert from sensor inlet_ic_temp: current reading 20 (C), new actions: BROADCAST_MSG|BIGIP_NOMINAL_CONDITION|SYSTEM_FANS_AUTO_LOW| Dec 1 12:59:30 juliet info chmand[6770]: 012a0006:6: Alert from sensor main_1.8vsb: current reading 1787 (mV), new actions: BROADCAST_MSG|BIGIP_NOMINAL_CONDITION| Dec 1 12:59:31 juliet info chmand[6770]: 012a0006:6: Alert from sensor main_1.2v: current reading 1201 (mV), new actions: BROADCAST_MSG|BIGIP_NOMINAL_CONDITION| Dec 1 12:59:31 juliet info chmand[6770]: 012a0006:6: Alert from sensor main_12vsb: current reading 11956 (mV), new actions: BROADCAST_MSG|BIGIP_NOMINAL_CONDITION| Dec 1 12:59:31 juliet info chmand[6770]: 012a0006:6: Alert from sensor main_1.5v_PCH: current reading 1494 (mV), new actions: BROADCAST_MSG|BIGIP_NOMINAL_CONDITION|
Frequent Hardware Failures
Hello Folks, Recently we have faced a strange issue from a customer. Initially, the first incident happened around 15 days ago, where their primary appliance failed not booting further(LCD was showing "F5 Incorporates"). For this incident F5 declared as RMA and shipped the new appliance. Now, after a few days, the newly installed appliance failed too. With same symptoms. (F5 - 3600). Good to note that primary and secondary appliances are installed in same rack, with same power strip. However the secondary appliance never failed, and primary twice. (also other hardware sharing the same power strip, seems working well). I can only think about a possibility of specific power cord where the primary appliance is connected. Anyone from you have ever experienced such incident before? Any help will be much appreciated! Thank you, Darshan