BigIP Report Old
Problem this snippet solves: This codeshare has been deprecated due to a hosting platform corruption. I have movedcode and conversation to a new record (on the same original URL) https://devcentral.f5.com/s/articles/bigip-report can be Overview This is a script which will generate a report of the BigIP LTM configuration on all your load balancers making it easy to find information and get a comprehensive overview of virtual servers and pools connected to them. This information is used to relay information to our NOC and developers to give them insight in where things are located and to be able to plan patching and deploys. I also use it myself as a quick way get information or gather data used as a foundation for RFC's, ie get a list of all external virtual servers without compression profiles. The script has been running on 13 pairs of load balancers, indexing over 1200 virtual servers for several years now and the report is widely used across the company and by many companies and governments across the world. It's easy to setup and use and only requires guest permissions on your devices. Demo/Preview Please note that it takes time to make these so sometimes they're a bit outdated and they only cover one HA pair. However, they still serve the purpose of showing what you can expect from the report. Interactive demo http://loadbalancing.se/bigipreportdemo/ Screen shots The main report: The device overview: Certificate details: How to use this snippet: This codeshare has been deprecated due to a hosting platform corruption. I have movedcode and conversation to a new record (on the same original URL) https://devcentral.f5.com/s/articles/bigip-report Installation instructions BigipReport REST This is the only branch we're updating since middle of 2020 and it supports 12.x and upwards (maybe even 11.6). Download:https://loadbalancing.se/downloads/bigipreport-v5.5.4.zip Documentation, installation instructions and troubleshooting:https://loadbalancing.se/bigipreport-rest/ Docker support This will be the recommended way of running bigipreport in the near future. It's still undergoing testing but it's looking really good so far. https://loadbalancing.se/2021/01/05/running-bigipreport-on-docker/ BigipReport (Legacy) Older version of the report that only runs on Windows and is depending on a Powershell plugin originally written by Joe Pruitt (F5). BigipReport (Stable): https://loadbalancing.se/downloads/bigipreport-5.3.1.zip BigipReport (BETA): https://loadbalancing.se/downloads/bigipreport-5.4.0-beta.zip iControl Snapin: https://loadbalancing.se/downloads/f5-icontrol.zip Documentation and installation instructions: https://loadbalancing.se/bigip-report/ Upgrade instructions Protect the report using APM and active directory Written by DevCentral member Shann_P: https://loadbalancing.se/2018/04/08/protecting-bigip-report-behind-an-apm-by-shannon-poole/ Got issues/problems/feedback? Still have issues? Drop a comment below. We usually reply quite fast. Any bugs found, issues detected or ideas contributed makes the report better for everyone, so it's always appreciated. --- Also trying out a Discord channel now. You're welcome to hang out with us there: https://discord.gg/7JJvPMYahA Code : 85931,86647,90730 Tested this on version: 13.0
APM variable assign examples
Problem this snippet solves: APM variable assign is a powerful tool to manipulate APM variable during policy evaluation supporting tcl code. On Devcentral answers, there are lots of variable assignment done with irule event ACCESS_POLICY_AGENT_EVENT. these snippets show how to do the same as irule without irule event. Note : I wrote most of codes, some others are from threads I found in DevCentral Answers section. How to use this snippet: create a variable assign box in VPE, then Add new entry In left side, let custom variable / unsecure default choice set the new variable name (or name of the variable you want to change the value). you should use bold value above tcl code. for timeout changes, you must use bold value above tcl code. In expression : let custom expression default choice paste provided code Username / Domain management session.logon.last.username extract CN from certificate subject and set it in username variable set subject [split [mcget {session.ssl.cert.subject}] ",="]; foreach {name value} $subject { if {[string trim $name] equals "CN"} { return [string trim $value]; } } session.logon.last.username combine username and domain variables expr{"[mcget{session.logon.last.domain}]\\[mcget{session.logon.last.username}]"} session.logon.last.ntdomain extract NT domain name from logon name if { [mcget {session.logon.last.username}] contains "\\" } { set username [string tolower [mcget {session.logon.last.logonname}]]; return [string range $username 0 [expr {[string first "\\" $username] -1}] ]; } else { return {} } one-line code expr {[set username [string tolower [mcget {session.logon.last.logonname}]]] contains "\\" ? [string range $username 0 [expr {[string first "\\" $username] -1}] ] : "" } session.logon.last.domain static assignment from ntdomain switch[stringtolower[mcget{session.logon.last.ntdomain}]]{ "domain1"{return "domain1.local"} "domain2"{return "domain2.local"} default{return "default.local" } } session.logon.last.username Extract username name from logonname (full username from logon page even if split domain from username is checked) setusername[stringtrim[mcget{session.logon.last.logonname}]]; if{$usernamecontains"\\"}{ return[stringrange$username[expr{[stringfirst"\\"$username]+1}]end]; }else{return$username} session.logon.last.upn Extract UPN value from Certificate X509Extension setextension[stringtolower[mcget{session.ssl.cert.x509extension}]]; return[stringrange$extension[expr{[stringfirst"othername:upn<"$extension]+14}][expr{[stringlast">"$extension]-1}]]; session timeout management session.inactivity_timeout Change inactivity session timeout based on a checkbox on the logon page (logon variable trusted) if { [mcget {session.logon.last.trusted}] == 1 } { return {5400} } else { return {1800} } one-line code (5400 seconds if condition before ? success, 1800 seconds else) expr { [mcget {session.logon.last.trusted}] == 1 ? {5400} : {1800}} session.inactivity_timeout Change inactivity session timeout based on client type (iOS, Android and WindowsPhone : half of inactivity timeout configured in profile parameters) expr { [mcget {session.client.platform}] == "WindowsPhone" || [mcget {session.client.platform}] == "Android" || [mcget {session.client.platform}] == "iOS" ? [mcget {session.inactivity_timeout}]/2 : [mcget {session.inactivity_timeout}] } session.max_session_timeout force to close the session à 17:00 expr { [clock scan "17:00"] - [mcget {session.user.starttime}] } session.max_session_timeout After a AD query which retreive attribute logonHours, force to close the session when user at the end of allowed logon hours set maximumSessionSeconds 604800 if {[set logonHours [mcget {session.ad.last.attr.logonHours}]] != "" && $logonHours != "FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF"} { #convert string to binary string binary scan [binary format H* $logonHours] b* logon_hours_binary_string # evaluate the number of seconds from last sunday set time_from_sunday [expr {[clock seconds] - [clock scan "last sunday"]}]; # search in string next hours with 0 value set current_index [expr {$time_from_sunday / 3600}]; # convert the index to number of seconds from last sunday if {[set next_denied_index [string first 0 $logon_hours_binary_string$logon_hours_binary_string $current_index]] == $current_index } {return 0} # evaluate number on seconds to disconnect time return [expr { $next_denied_index*3600 - $time_from_sunday}] } else { return $maximumSessionSeconds} Windows Info session.windows_info_os.last.fqdn search and return FQDN hostname in computer names list after windows Info Box foreach x [split [mcget {session.windows_info_os.last.computer}] "|"] { if { $x ends_with ".f5demo.lab" } { return $x } } session.windows_info_os.last.computer_name search FQDN hostname in computer names list after windows Info Box, then return shortname (without domain name) foreach x [split [mcget {session.windows_info_os.last.computer}] "|"] { if { $x ends_with ".f5demo.lab" } { return [lindex [split $x "."] 0] } } Machine cert To allow machine certificate revocation validation, add a variable assign with 2 following variables before OCSP or CRLDP boxes. session.ssl.cert.whole store machine certificate as it was user certificate expr {[mcget {session.check_machinecert.last.cert.cert}]} session.ssl.cert.certissuer store machine certificate issuer as it was user certificate issuer expr {[mcget {session.check_machinecert.last.cert.issuer}]} HTTP auth returned cookie parsing session.custom.http_auth_mycookie extract from HTTP auth cookie list the cookie value of mycookie expr { [lindex [regexp -inline {mycookie=([^;\\\r]*)} [mcget session.http.last.response_cookie]] 1] } replace portal or network access Webtop by full webtop if unsupported resource are assigned Webtop can be: Portal webtop : define an internal web server as home page Network access Webtop : start automatically Network access when connected Full Webtop : display all assigned ressources in one page hosted on the F5. Some customers want to assign different webtop based on assigned ressources. one portal ressource only -> portal webtop one Network access ressource only -> Network Access ressource more than one portal ressource -> Full webtop more than one Network access ressource -> Full webtop RDP, Application tunnel, SAML ressources assigned -> Full Webtop In Advanced ressource assign, the last assigned webtop is applied to the session. If the user is assigned non portal ressource (ex : RDP) and portal webtop, he will not be allowed to connect. session.assigned.webtop this code code is used if portal or network access webtop are assigned and number of resources is supported only with full webtop set fullwt /Common/wt-Full; set wt [mcget {session.assigned.webtop}]; set pa [llength [mcget {session.assigned.resources.pa}]]; set at [llength [mcget {session.assigned.resources.at}]]; set na [llength [mcget {session.assigned.resources.na}]]; set rd [llength [mcget {session.assigned.resources.rd}]]; set saml [llength [mcget {session.assigned.resources.saml}]]; if {$rd || $at || $saml || ([expr { $pa + $na }] > 1)} {set wt $fullwt}; unset fullwt; unset pa; unset at; unset na; unset rd; unset saml; return $wt; one-line code. Don't forget to replace "/Common/wt-Full" with your own webtop full in expression. expr { [llength [concat [mcget {session.assigned.resources.rd}] [mcget {session.assigned.resources.at}] [mcget {session.assigned.resources.atsaml}]]] || [llength [concat [mcget {session.assigned.resources.pa}] [mcget {session.assigned.resources.na}]]] >1 ? "/Common/wt-Full" : [mcget {session.assigned.webtop}]} Same condition for Advanced resource Assign condition. This condition doesn't match with previous rules in the same Advanced resource assign. must be in a dedicated resource assign box. expr { [llength [concat [mcget {session.assigned.resources.rd}] [mcget {session.assigned.resources.at}] [mcget {session.assigned.resources.atsaml}]]] || [llength [concat [mcget {session.assigned.resources.pa}] [mcget {session.assigned.resources.na}]]] >1} For Kerberos SSO when working with Kerberos SSO, 2 variable sources must be set: username : must be equal to user sAMAccountName domain : must be equal to user FQDN domain When working on access policy with multiple SSO method depending on the URI, Host header or some other parameters, you may have conflict on default SSO variables. For example, for Exchange : activesync SSO profile is basic with username format is NTDOMAIN\username Autodiscover SSP profile can be NTLM with username format is username domain format is NTDOMAIN OWA SSO profile can be kerberos with username : must be equal to user sAMAccountName domain : must be equal to user FQDN domain like DOMAIN.LOCAL (different than NT Domain) default SSO variables are : session.sso.token.last.username session.sso.token.last.password session.logon.last.domain to support multiple SSO on the same Access policy, I recommende to set new variables based on previous AD Query session.krbsso.username expr {[mcget {session.ad.last.attr.sAMAccountName}]} session.krbsso.domain expr {[mcget {session.ad.last.actualdomain}]} Code : No codeBIG-IP Report
Problem this snippet solves: Overview This is a script which will generate a report of the BIG-IP LTM configuration on all your load balancers making it easy to find information and get a comprehensive overview of virtual servers and pools connected to them. This information is used to relay information to NOC and developers to give them insight in where things are located and to be able to plan patching and deploys. I also use it myself as a quick way get information or gather data used as a foundation for RFC's, ie get a list of all external virtual servers without compression profiles. The script has been running on 13 pairs of load balancers, indexing over 1200 virtual servers for several years now and the report is widely used across the company and by many companies and governments across the world. It's easy to setup and use and only requires auditor (read-only) permissions on your devices. Demo/Preview Interactive demo http://loadbalancing.se/bigipreportdemo/ Screen shots The main report: The device overview: Certificate details: How to use this snippet: Installation instructions BigipReport REST This is the only branch we're updating since middle of 2020 and it supports 12.x and upwards (maybe even 11.6). Downloads (two latest versions): https://loadbalancing.se/downloads/bigipreport-v5.7.0.zip https://loadbalancing.se/downloads/bigipreport-v5.6.5.zip Documentation, installation instructions and troubleshooting:https://loadbalancing.se/bigipreport-rest/ Docker support https://loadbalancing.se/2021/01/05/running-bigipreport-on-docker/ Kubernetes support https://loadbalancing.se/2021/04/16/bigipreport-on-kubernetes/ BIG-IP Report (Legacy) Older version of the report that only runs on Windows and is depending on a Powershell plugin originally written by Joe Pruitt (F5) BIG-IP Report (only download this if you have v10 devices): https://loadbalancing.se/downloads/bigipreport-5.4.0-beta.zip iControl Snapin https://loadbalancing.se/downloads/f5-icontrol.zip Documentation and Installation Instructions https://loadbalancing.se/bigip-report/ Upgrade instructions Protect the report using APM and active directory Written by DevCentral member Shann_P: https://loadbalancing.se/2018/04/08/protecting-bigip-report-behind-an-apm-by-shannon-poole/ Got issues/problems/feedback? Still have issues? Drop a comment below. We usually reply quite fast. Any bugs found, issues detected or ideas contributed makes the report better for everyone, so it's always appreciated. --- Join us on Discord: https://discord.gg/7JJvPMYahA Code : BigIP Report Tested this on version: 12, 13, 14, 15, 16Use F5 LTM as HTTP Proxy
Problem this snippet solves: LTM product can be used as a HTTP Proxy for servers and PC. This code explains minimum requirements to configure proxy feature without SWG module (configurations from Explicit Forward Proxy documentation without documentation ) and without explicit proxy iApp. How to use this snippet: All these commands must be run in bash shell. Create HTTP PROXY VIRTUAL SERVER Configure variables used in next commands Variable HTTPBaseName is used to create : Resolver object : RESOLVER_${HTTPBaseName} HTTP profile : http_${HTTPBaseName} virtual server : VS_${HTTPBaseName} HTTPBaseName="HTTP_FORWARD_PROXY" VS_IP="192.168.2.80" VS_PORT="8080" create DNS resolver with your DNS server (1.1.1.1 is for demo using cloudflare) tmsh create net dns-resolver RESOLVER_${HTTPBaseName} { forward-zones replace-all-with { . { nameservers replace-all-with { 1.1.1.1:domain { } } } } route-domain 0 } create HTTP profile type explicit, using DNS resolver. The parameter default-connect-handling allow enables HTTPS connections without SSL inspection tmsh create ltm profile http http_${HTTPBaseName} { defaults-from http-explicit explicit-proxy { default-connect-handling allow dns-resolver RESOLVER_${HTTPBaseName} } proxy-type explicit } create HTTP proxy Virtual server tmsh create ltm virtual VS_${HTTPBaseName} { destination ${VS_IP}:${VS_PORT} ip-protocol tcp mask 255.255.255.255 profiles replace-all-with { http_${HTTPBaseName} { } tcp } source 0.0.0.0/0 source-address-translation { type automap } translate-address enabled translate-port enabled} ENABLE SSL FORWARD PROXY This section is not required to forward HTTPS requests but only to enable SSL inspection on HTTPS requests. Note : Following configuration requires SSL, Forward Proxy License. Configure variables used in next commands Variable SSLBaseName is used to create : certificate / key pair : ${SSLBaseName} Client SSL profile : clientssl_${SSLBaseName} Server SSL profile : serverssl_${SSLBaseName} virtual server : VS_${SSLBaseName} SSLBaseName="SSL_FORWARD_PROXY" dirname="/var/tmp" CASubject="/C=FR/O=DEMO\ COMPANY/CN=SSL\ FORWARD\ PROXY\ CA" Create self-signed certificate for CA purpose (not available in WebUI) Self-signed certificates created in WebUI doesn't have CA capability required for SSL FORWARD PROXY. openssl genrsa -out ${dirname}/${SSLBaseName}.key 4094 openssl req -sha512 -new -x509 -days 3650 -key ${dirname}/${SSLBaseName}.key -out ${dirname}/${SSLBaseName}.crt -subj "${CASubject}" Import certificates in TMOS tmsh install sys crypto key ${SSLBaseName}.key from-local-file ${dirname}/${SSLBaseName}.key; tmsh install sys crypto cert ${SSLBaseName}.crt from-local-file ${dirname}/${SSLBaseName}.crt; After CA Certificate is imported, browse in WebUI, retrieve it and import it in client browsers trusted CA Create SSL profiles for SSL FORWARD PROXY tmsh create ltm profile client-ssl clientssl_${SSLBaseName} { cert-lookup-by-ipaddr-port disabled defaults-from clientssl mode enabled proxy-ca-cert ${SSLBaseName}.crt proxy-ca-key ${SSLBaseName}.key ssl-forward-proxy enabled } tmsh create ltm profile server-ssl serverssl_${SSLBaseName} { defaults-from serverssl ssl-forward-proxy enabled } create SSL FORWARD PROXY Virtual server tmsh create ltm virtual VS_${SSLBaseName} { destination 0.0.0.0:https ip-protocol tcp profiles replace-all-with { clientssl_${SSLBaseName} { context clientside } serverssl_${SSLBaseName} { context serverside } http { } tcp { } } source 0.0.0.0/0 translate-address disabled translate-port disabled vlans replace-all-with { http-tunnel } vlans-enabled } Change HTTP EXPLICIT PROXY Default Connect Handling to Deny tmsh modify ltm profile http http_${HTTPBaseName} explicit-proxy { default-connect-handling deny } Note : These commands were tested in both 12.1 and 13.1 versions. Code : No Code
F5 Analytics iApp
Problem this snippet solves: Analytics iApp v3.7.0 You can use this fully supported version of the analytics iApp template to marshal statistical and logging data from the BIG-IP system. The iApp takes this data and formats it as a JSON object which is then exported for consumption by data consumers, such as F5 BIG-IQ or applications such as Splunk. The Analytics iApp allows you to configure several categories of data to be exported. For data consumers like Splunk, the iApp lets you configure the network endpoint to which the data is sent. Version 3.7.0 of the iApp template is fully supported by F5 and available on downloads.f5.com. We recommend all users upgrade to this version. For more information, see https://support.f5.com/csp/article/K07859431. While this version of the iApp is nearly identical to the v3.6.13 which was available on this page, the major difference (other than being fully supported) is that ability to gather APM statistics using the iApp has been removed from BIG-IP versions prior to 12.0. Supported/Tested BIG-IP versions: 11.4.0 - 12.1.2. Data Sources: LTM, GTM, AFM, ASM, APM, SWG, and iHealth (APM statistics require 12.0 or later) Data Output Formats: Splunk, F5 Analytics, F5 Risk Engine Splunk App: https://apps.splunk.com/apps/id/f5 The new deployment guide can be found on F5.com: http://f5.com/pdf/deployment-guides/f5-analytics-dg.pdf Video Demo - https://player.vimeo.com/video/156773835 Solution Architecture - 20s Installation - 1m53s UI Demo Device Dashboard - 6m44s Application Issue Troubleshooting - 9m26s Application Team Self Service - 12m17s Code : https://downloads.f5.com/esd/ecc.sv?sw=BIG-IP&pro=iApp_Templates&ver=iApps&container=iApp-Templates
Export Virtual Server Configuration in CSV - tmsh cli script
Problem this snippet solves: This is a simple cli script used to collect all the virtuals name, its VIP details, Pool names, members, all Profiles, Irules, persistence associated to each, in all partitions. A sample output would be like below, One can customize the code to extract other fields available too. The same logic can be allowed to pull information's from profiles stats, certificates etc. Update: 5th Oct 2020 Added Pool members capture in the code. After the Pool-Name, Pool-Members column will be found. If a pool does not have members - field not present: "members" will shown in the respective Pool-Members column. If a pool itself is not bound to the VS, then Pool-Name, Pool-Members will have none in the respective columns. Update: 21st Jan 2021 Added logic to look for multiple partitions & collect configs Update: 12th Feb 2021 Added logic to add persistence to sheet. Update: 26th May 2021 Added logic to add state & status to sheet. Update: 24th Oct 2023 Added logic to add hostname, Pool Status,Total-Connections & Current-Connections. Note: The codeshare has multiple version, use the latest version alone. The reason to keep the other versions is for end users to understand & compare, thus helping them to modify to their own requirements. Hope it helps. How to use this snippet: Login to the LTM, create your script by running the below commands and paste the code provided in snippet tmsh create cli script virtual-details So when you list it, it should look something like below, [admin@labltm:Active:Standalone] ~ # tmsh list cli script virtual-details cli script virtual-details { proc script::run {} { puts "Virtual Server,Destination,Pool-Name,Profiles,Rules" foreach { obj } [tmsh::get_config ltm virtual all-properties] { set profiles [tmsh::get_field_value $obj "profiles"] set remprof [regsub -all {\n} [regsub -all"context" [join $profiles "\n"] "context"] " "] set profilelist [regsub -all "profiles " $remprof ""] puts "[tmsh::get_name $obj],[tmsh::get_field_value $obj "destination"],[tmsh::get_field_value $obj "pool"],$profilelist,[tmsh::get_field_value $obj "rules"]" } } total-signing-status not-all-signed } [admin@labltm:Active:Standalone] ~ # And you can run the script like below, tmsh run cli script virtual-details > /var/tmp/virtual-details.csv And get the output from the saved file, cat /var/tmp/virtual-details.csv Old Codes: cli script virtual-details { proc script::run {} { puts "Virtual Server,Destination,Pool-Name,Profiles,Rules" foreach { obj } [tmsh::get_config ltm virtual all-properties] { set profiles [tmsh::get_field_value $obj "profiles"] set remprof [regsub -all {\n} [regsub -all " context" [join $profiles "\n"] "context"] " "] set profilelist [regsub -all "profiles " $remprof ""] puts "[tmsh::get_name $obj],[tmsh::get_field_value $obj "destination"],[tmsh::get_field_value $obj "pool"],$profilelist,[tmsh::get_field_value $obj "rules"]" } } total-signing-status not-all-signed } ###=================================================== ###2.0 ###UPDATED CODE BELOW ### DO NOT MIX ABOVE CODE & BELOW CODE TOGETHER ###=================================================== cli script virtual-details { proc script::run {} { puts "Virtual Server,Destination,Pool-Name,Pool-Members,Profiles,Rules" foreach { obj } [tmsh::get_config ltm virtual all-properties] { set poolname [tmsh::get_field_value $obj "pool"] set profiles [tmsh::get_field_value $obj "profiles"] set remprof [regsub -all {\n} [regsub -all " context" [join $profiles "\n"] "context"] " "] set profilelist [regsub -all "profiles " $remprof ""] if { $poolname != "none" }{ set poolconfig [tmsh::get_config /ltm pool $poolname] foreach poolinfo $poolconfig { if { [catch { set member_name [tmsh::get_field_value $poolinfo "members" ]} err] } { set pool_member $err puts "[tmsh::get_name $obj],[tmsh::get_field_value $obj "destination"],$poolname,$pool_member,$profilelist,[tmsh::get_field_value $obj "rules"]" } else { set pool_member "" set member_name [tmsh::get_field_value $poolinfo "members" ] foreach member $member_name { append pool_member "[lindex $member 1] " } puts "[tmsh::get_name $obj],[tmsh::get_field_value $obj "destination"],$poolname,$pool_member,$profilelist,[tmsh::get_field_value $obj "rules"]" } } } else { puts "[tmsh::get_name $obj],[tmsh::get_field_value $obj "destination"],$poolname,none,$profilelist,[tmsh::get_field_value $obj "rules"]" } } } total-signing-status not-all-signed } ###=================================================== ### Version 3.0 ### UPDATED CODE BELOW FOR MULTIPLE PARTITION ### DO NOT MIX ABOVE CODE & BELOW CODE TOGETHER ###=================================================== cli script virtual-details { proc script::run {} { puts "Partition,Virtual Server,Destination,Pool-Name,Pool-Members,Profiles,Rules" foreach all_partitions [tmsh::get_config auth partition] { set partition "[lindex [split $all_partitions " "] 2]" tmsh::cd /$partition foreach { obj } [tmsh::get_config ltm virtual all-properties] { set poolname [tmsh::get_field_value $obj "pool"] set profiles [tmsh::get_field_value $obj "profiles"] set remprof [regsub -all {\n} [regsub -all " context" [join $profiles "\n"] "context"] " "] set profilelist [regsub -all "profiles " $remprof ""] if { $poolname != "none" }{ set poolconfig [tmsh::get_config /ltm pool $poolname] foreach poolinfo $poolconfig { if { [catch { set member_name [tmsh::get_field_value $poolinfo "members" ]} err] } { set pool_member $err puts "$partition,[tmsh::get_name $obj],[tmsh::get_field_value $obj "destination"],$poolname,$pool_member,$profilelist,[tmsh::get_field_value $obj "rules"]" } else { set pool_member "" set member_name [tmsh::get_field_value $poolinfo "members" ] foreach member $member_name { append pool_member "[lindex $member 1] " } puts "$partition,[tmsh::get_name $obj],[tmsh::get_field_value $obj "destination"],$poolname,$pool_member,$profilelist,[tmsh::get_field_value $obj "rules"]" } } } else { puts "$partition,[tmsh::get_name $obj],[tmsh::get_field_value $obj "destination"],$poolname,none,$profilelist,[tmsh::get_field_value $obj "rules"]" } } } } total-signing-status not-all-signed } ###=================================================== ### Version 4.0 ### UPDATED CODE BELOW FOR CAPTURING PERSISTENCE ### DO NOT MIX ABOVE CODE & BELOW CODE TOGETHER ###=================================================== cli script virtual-details { proc script::run {} { puts "Partition,Virtual Server,Destination,Pool-Name,Pool-Members,Profiles,Rules,Persist" foreach all_partitions [tmsh::get_config auth partition] { set partition "[lindex [split $all_partitions " "] 2]" tmsh::cd /$partition foreach { obj } [tmsh::get_config ltm virtual all-properties] { set poolname [tmsh::get_field_value $obj "pool"] set profiles [tmsh::get_field_value $obj "profiles"] set remprof [regsub -all {\n} [regsub -all " context" [join $profiles "\n"] "context"] " "] set profilelist [regsub -all "profiles " $remprof ""] set persist [lindex [lindex [tmsh::get_field_value $obj "persist"] 0] 1] if { $poolname != "none" }{ set poolconfig [tmsh::get_config /ltm pool $poolname] foreach poolinfo $poolconfig { if { [catch { set member_name [tmsh::get_field_value $poolinfo "members" ]} err] } { set pool_member $err puts "$partition,[tmsh::get_name $obj],[tmsh::get_field_value $obj "destination"],$poolname,$pool_member,$profilelist,[tmsh::get_field_value $obj "rules"],$persist" } else { set pool_member "" set member_name [tmsh::get_field_value $poolinfo "members" ] foreach member $member_name { append pool_member "[lindex $member 1] " } puts "$partition,[tmsh::get_name $obj],[tmsh::get_field_value $obj "destination"],$poolname,$pool_member,$profilelist,[tmsh::get_field_value $obj "rules"],$persist" } } } else { puts "$partition,[tmsh::get_name $obj],[tmsh::get_field_value $obj "destination"],$poolname,none,$profilelist,[tmsh::get_field_value $obj "rules"],$persist" } } } } total-signing-status not-all-signed } ###=================================================== ### 5.0 ### UPDATED CODE BELOW ### DO NOT MIX ABOVE CODE & BELOW CODE TOGETHER ###=================================================== cli script virtual-details { proc script::run {} { puts "Partition,Virtual Server,Destination,Pool-Name,Pool-Members,Profiles,Rules,Persist,Status,State" foreach all_partitions [tmsh::get_config auth partition] { set partition "[lindex [split $all_partitions " "] 2]" tmsh::cd /$partition foreach { obj } [tmsh::get_config ltm virtual all-properties] { foreach { status } [tmsh::get_status ltm virtual [tmsh::get_name $obj]] { set vipstatus [tmsh::get_field_value $status "status.availability-state"] set vipstate [tmsh::get_field_value $status "status.enabled-state"] } set poolname [tmsh::get_field_value $obj "pool"] set profiles [tmsh::get_field_value $obj "profiles"] set remprof [regsub -all {\n} [regsub -all " context" [join $profiles "\n"] "context"] " "] set profilelist [regsub -all "profiles " $remprof ""] set persist [lindex [lindex [tmsh::get_field_value $obj "persist"] 0] 1] if { $poolname != "none" }{ set poolconfig [tmsh::get_config /ltm pool $poolname] foreach poolinfo $poolconfig { if { [catch { set member_name [tmsh::get_field_value $poolinfo "members" ]} err] } { set pool_member $err puts "$partition,[tmsh::get_name $obj],[tmsh::get_field_value $obj "destination"],$poolname,$pool_member,$profilelist,[tmsh::get_field_value $obj "rules"],$persist,$vipstatus,$vipstate" } else { set pool_member "" set member_name [tmsh::get_field_value $poolinfo "members" ] foreach member $member_name { append pool_member "[lindex $member 1] " } puts "$partition,[tmsh::get_name $obj],[tmsh::get_field_value $obj "destination"],$poolname,$pool_member,$profilelist,[tmsh::get_field_value $obj "rules"],$persist,$vipstatus,$vipstate" } } } else { puts "$partition,[tmsh::get_name $obj],[tmsh::get_field_value $obj "destination"],$poolname,none,$profilelist,[tmsh::get_field_value $obj "rules"],$persist,$vipstatus,$vipstate" } } } } total-signing-status not-all-signed } Latest Code: cli script virtual-details { proc script::run {} { set hostconf [tmsh::get_config /sys global-settings hostname] set hostname [tmsh::get_field_value [lindex $hostconf 0] hostname] puts "Hostname,Partition,Virtual Server,Destination,Pool-Name,Pool-Status,Pool-Members,Profiles,Rules,Persist,Status,State,Total-Conn,Current-Conn" foreach all_partitions [tmsh::get_config auth partition] { set partition "[lindex [split $all_partitions " "] 2]" tmsh::cd /$partition foreach { obj } [tmsh::get_config ltm virtual all-properties] { foreach { status } [tmsh::get_status ltm virtual [tmsh::get_name $obj]] { set vipstatus [tmsh::get_field_value $status "status.availability-state"] set vipstate [tmsh::get_field_value $status "status.enabled-state"] set total_conn [tmsh::get_field_value $status "clientside.tot-conns"] set curr_conn [tmsh::get_field_value $status "clientside.cur-conns"] } set poolname [tmsh::get_field_value $obj "pool"] set profiles [tmsh::get_field_value $obj "profiles"] set remprof [regsub -all {\n} [regsub -all " context" [join $profiles "\n"] "context"] " "] set profilelist [regsub -all "profiles " $remprof ""] set persist [lindex [lindex [tmsh::get_field_value $obj "persist"] 0] 1] if { $poolname != "none" }{ foreach { p_status } [tmsh::get_status ltm pool $poolname] { set pool_status [tmsh::get_field_value $p_status "status.availability-state"] } set poolconfig [tmsh::get_config /ltm pool $poolname] foreach poolinfo $poolconfig { if { [catch { set member_name [tmsh::get_field_value $poolinfo "members" ]} err] } { set pool_member $err puts "$hostname,$partition,[tmsh::get_name $obj],[tmsh::get_field_value $obj "destination"],$poolname,$pool_status,$pool_member,$profilelist,[tmsh::get_field_value $obj "rules"],$persist,$vipstatus,$vipstate,$total_conn,$curr_conn" } else { set pool_member "" set member_name [tmsh::get_field_value $poolinfo "members" ] foreach member $member_name { append pool_member "[lindex $member 1] " } puts "$hostname,$partition,[tmsh::get_name $obj],[tmsh::get_field_value $obj "destination"],$poolname,$pool_status,$pool_member,$profilelist,[tmsh::get_field_value $obj "rules"],$persist,$vipstatus,$vipstate,$total_conn,$curr_conn" } } } else { puts "$hostname,$partition,[tmsh::get_name $obj],[tmsh::get_field_value $obj "destination"],$poolname,none,none,$profilelist,[tmsh::get_field_value $obj "rules"],$persist,$vipstatus,$vipstate,$total_conn,$curr_conn" } } } } } Tested this on version: 13.0
ProxyPass v10/v11
Problem this snippet solves: iRule to replace the functionality of Apache Webserver ProxyPass and ProxyPassReverse functions. Allows you to do hostname and path name modifications as HTTP traffic passes through the LTM. This optimized version requires TMOS v10 or higher. If you are using APM for authentication on the virtual server, please use the ProxyPass_for_use_with_APM iRule instead. (Full documentation follows the iRule.) For use with TMOS v9, see ProxyPass v8.2 Note: In 10.1+ you can use an internal data group to store the ProxyPass configuration. Ignore the comments to the contrary in the instructions as these were for pre-10.1 releases. Please post questions or fixes for this iRule in the iRules forum to get the fastest response. Thanks Aaron. Introduction Sometimes it is desirable to have a different look and feel to your website on the outside than you have in the inside. You may want www.company.com/usa/ to internally go to the server usa.company.com. You may want support.company.com to go internally to abc123.company.com/web/support. This can create a few issues - sometimes the web server expects to see a certain hostname (i.e. for name-based virtual hosting) or will use the internal hostname and/or path when sending a redirect to the clients. These problems can be overcome with the Apache webserver using the ProxyPass module which can translate the URL on the way into the server, and the ProxyPassReverse module which can un-translate header fields such as Location in the case of a redirect. Now you can accomplish this with an iRule. The ProxyPass iRule translates incoming requests in a flexible manner and untranslates the Location, Content-Location, and/or URI headers in the response back to the client. ProxyPass also rewrites the domain and path in cookies set by the server. Page Content Modification In addition, this rule will perform basic page modification as needed (this feature is disabled by default but can be enabled in the RULE_INIT event). Using the example from the introduction, if the page content contains a link to http://abc123.company.com/web/support/viewticket.html, the iRule will modify that to be http://support.company.com/viewticket.html. Here are some examples: < a href=http://www.domain.com/path/file.html> will be modified assuming the incoming request was matched by the ProxyPass iRule and the inside hostname was www.domain.com and the inside path was /path. < a href="page2.html"> will not need to be modified as this is a URL already relative to the path. Even relative URLs such as < a href="../page2.html"> will work as long as it does not try to go above the top-level directory defined by the ProxyPass rules. You must have a stream profile defined on any virtual servers the rule is applied to in order to enable the page modification feature. Virtual Server The first step to using the ProxyPass iRule is to define the rule on your BIG-IP and associate it with one or more Virtual Servers. Note that each virtual server MUST have an HTTP profile defined (doesn't matter which one). I also highly recommend applying a OneConnect profile, especially if you will be choosing pools with ProxyPass. It also must have a stream profile associated with it if you want to uncomment the page modification code. The rule will work on HTTP sites as well as HTTPS sites where the SSL is terminated on the BIG-IP (i.e. a client-side SSL profile is defined). Data Groups You can apply the ProxyPass rule to any virtual server that you want to do translations on. But just applying the rule will have no effect unless you define the translations you want done. This is done by defining specific Data Groups. The ProxyPass iRule uses Data Groups which are created and managed by going to Local Traffic / Virtual Servers / iRules on the left menu bar in the BIG-IP GUI. Then choose the "Data Group List" tab at the top of the screen. Here you can create the data groups used by this rule. For 10.0.x, the data groups must be External, type "String", and Read-only. For 10.1 and higher, the data group can be internal or external with name=value pairings. In order to use this rule on a virtual server you must apply the rule to the virtual server and create a data group named ProxyPassXYZ where "XYZ" needs to be the name of the virtual server. If both of these conditions are not met then the rule will not work for that virtual server. ProxyPassXYZ Data Groups If your virtual server is named XYZ and has the ProxyPass iRule associated with it, it will look for a data group named ProxyPassXYZ. Assuming that class is found, for each new HTTP request, the rule will find the one row that matches the hostname/path used in the request. For example, the data group may contain 4 entries (each line below is one string in the data group): "www.usa.company.com/support" := "support.company-internal.com:8080/usa", "www.usa.company.com/" := "www.company-internal.com:8080/usa", "www.japan.company.com/" := "www.company-internal.com:8080/japan", "/" := "www.company-internal.com:8080/others", A request need not match any entries - if no entries match then the iRule will have no effect. But each request will only match at most one entry and that will be the entry with the most specific left-hand-side. Entries with hostnames specified on the left-hand-side will be matched before entries without hostnames. If multiple entries match then the entry with the longest path name on the left-hand-side will be used. The example above lists entries from most-specific to least-specific, just as the rule will process them, but in your actual data group the order of the entries does not matter. In the example above, requests to http://www.usa.company.com/support will match the first entry and have the host header changed to "support.company-internal.com:8080" and the URI will be rewritten so that the string /support at the beginning of the URI will be changed to /usa. Furthermore, requests to http://www.usa.company.com/ will match the second entry as long as the URI does not begin with "/support" in which case it would match the first entry. In that case the Host header will be changed to "www.company-internal.com:8080" and whatever URI the client sends in will be prepended with "/usa". Likewise all requests to http://www.japan.company.com/ will match the third entry and have the Host header changed to "www.company-internal.com:8080" and the URIs would be prepended with "/japan". Finally, all other requests that hit this example virtual server would match the least-specific rule which is simply "/" -- all URIs begin with "/" and thus all requests will match the fourth entry if they did not match any others. Remember that a catch-all entry is not required, but in this example we want to prepend the URI of all other requests with "/others". Note that the ProxyPass iRule does not actually alter the destination of the requests by default. In the examples above all of the requests would go to the default pool regardless of the entries they match. The hostnames and ports specified in the right-hand entry is only used to modify the Host header. To alter the destination pool see the next section. Dynamic Pool Selection You may also specify an alternate pool as a second item in the right-hand value of the entry. This is optional any items in the list without a pool name will just use the default pool associated with the virtual server. For example: "/support" := "support.company.com/ SupportPool", "/downloads" := "downloads.company.com/ DownloadPool", If the pool name is not valid the user will get an error and you should see an error message in /var/log/ltm. Dynamic SNAT You can optionally define a ProxyPassSNATs data group. This will allow you to use different SNAT IP based on which pool you send traffic to. The ProxyPassSNATs data group is shared by all virtual servers but will only have an effect if the selected pool is listed in the data group. The format of this data group (internal string type) is: Pool1 W.X.Y.Z Pool2 automap Dynamic ServerSSL Profiles You can optionally define a ProxyPassSSLProfiles data group and apply a generic serverssl profile to the virtual server. This will allow you to use different serverssl profiles based on which pool you send traffic to. The ProxyPassSSLProfiles data group is shared by all virtual servers but will only have an effect if the selected pool is listed in the data group and a generic serverssl is applied to the virtual server. The format of this data group (internal string type) is: Pool1 ServerSSLProfile1 Pool2 ServerSSLProfile2 Regular Expressions New in v10: you may also use regular expressions and backreferences when building your rule set. "/" := "=www.company.com/(.*?)/=$1.company.com/=", As you see, instead of a regular server-side entry, we have "=regex=replace=". Basically, in order for the regex to be run, the left-hand side must match the client host/path (just "/" in this case, which will always match unless something more specific matches). Once this happens, the client host and URI are combined into a form similar to www.domain.com/path and the regular expression is run a against it. If the regular expression does not match, ProxyPass does not alter the request. If it does match, the clientside path becomes the match string and the serverside path becomes the replace string. Within this replace string you can use $1 through $9 as back-references to grouped items in the original regular expression. So, the example above, entry is equivalent to all of these entries: "www.company.com/sales" := "sales.company.com/", "www.company.com/support" := "support.company.com/", "www.company.com/employment" := "employment.company.com/", Debugging You can debug your ProxyPass rules by setting the static::ProxyPassDebug variable at the top of the rule to 1 (or 2 for more verbose debugging). Once you do this you can SSH to the BIG-IP and run the command "tail -f /var/log/ltm" to see what ProxyPass is doing to your requests. Code : # ProxyPass iRule, Version 10.9 # Nov 26 2012. Date # THIS VERSION REQUIRES TMOS v10 or higher. Use ProxyPass v8.2 for TMOS 9.x. # This version does not work with APM-enabled virtual servers, please # download ProxyPass 10.2APM for this use case. # Created by Kirk Bauer # https://devcentral.f5.com/s/wiki/default.aspx/iRules/ProxyPassV10.html # (please see end of iRule for additional credits) # Purpose: # iRule to replace the functionality of Apache Webserver ProxyPass and # ProxyPassReverse functions. It allows you to perform host name and path name # modifications as HTTP traffic passes through the LTM. In other words, you # can have different hostnames and directory names on the client side as you # do on the server side and ProxyPass handles the necessary translations. # NOTE: You should not need to modify this iRule in any way except the settings # in the RULE_INIT event. Just apply the iRule to the virtual server and # define the appropriate Data Group and you are done. If you do make any # changes to this iRule, please send your changes and reasons to me so that # I may understand how ProxyPass is being used and possibly incorporate your # changes into the core release. # Configuration Requirements # 1) The ProxyPass iRule needs to be applied to an HTTP virtual server or # an HTTPS virtual server with a clientssl profile applied to it. # 2) A data group (LTM -> iRules -> Data Groups tab) must be defined with # the name "ProxyPassVIRTUAL" where VIRTUAL is the name of the virtual server # (case-sensitive!). See below for the format of this data group (class). # For 10.0.x, you must use an EXTERNAL data group. # 3) You must define a default pool on the virtual server unless you specify # a pool in every entry in the data group. # 4) If you are using ProxyPass to select alternate pools, you must define # a OneConnect profile in most cases! # 5) ProxyPass does not rewrite links embedded within pages by default, just # headers. If you want to change this, edit the $static::RewriteResponsePayload variable in RULE_INIT # and apply the default stream profile to the virtual server. # Data Group Information # For 10.0.x, you must define an external data group (type=String, read-only) which loads # from a file on your BIG-IP. For 10.1 and higher you can use an internal string data group with name=value pairings. # The format of the file is as follows: # "clientside" := "serverside", # or # "clientside" := "serverside poolname", # The clientside and serverside fields must contain a URI (at least a "/") and # may also contain a hostname. Here are some examples: # "/clientdir" := "/serverdir", # "www.host.com/clientdir" := "internal.company.com/serverdir", # "www.host.com/" := "internal.company.com/serverdir/", # Notes: # 1) You can optionally define a ProxyPassSNATs data group to SNAT based # on the pool selected. # 2) You can optionally define a ProxyPassSSLProfiles data group to select # a serverssl profile based on the pool selected. # 3) You can also use regular expressions which is documented on DevCentral. when RULE_INIT { # Enable to debug ProxyPass translations via log messages in /var/log/ltm # (2 = verbose, 1 = essential, 0 = none) set static::ProxyPassDebug 0 # Enable to rewrite page content (try a setting of 1 first) # (2 = attempt to rewrite host/path and just /path, 1 = attempt to rewrite host/path) set static::RewriteResponsePayload 0 } when CLIENT_ACCEPTED { # Get the default pool name. This is used later to explicitly select # the default pool for requests which don't have a pool specified in # the class. set default_pool [LB::server pool] # The name of the Data Group (aka class) we are going to use. # Parse just the virtual server name by stripping off the folders (if present) set clname "ProxyPass[URI::basename [virtual name]]" if { $static::ProxyPassDebug > 1 } { log local0. "[virtual name]: [IP::client_addr]:[TCP::client_port] -> [IP::local_addr]:[TCP::local_port]" } } when HTTP_REQUEST { # "bypass" tracks whether or not we made any changes inbound so we # can skip changes on the outbound traffic for greater efficiency. set bypass 1 # Initialize other local variables used in this rule set orig_uri "[HTTP::uri]" set orig_host "[HTTP::host]" set log_prefix "VS=[virtual name], Host=$orig_host, URI=$orig_uri" set clientside "" set serverside "" set newpool "" set ppass "" if {! [class exists $clname]} { log local0. "$log_prefix: Data group $clname not found, exiting." pool $default_pool return } else { set ppass [class match -element "$orig_host$orig_uri" starts_with $clname] if {$ppass eq ""} { # Did not find with hostname, look for just path set ppass [class match -element "$orig_uri" starts_with $clname] } if {$ppass eq ""} { # No entries found if { $static::ProxyPassDebug > 0 } { log local0. "$log_prefix: No rule found, using default pool $default_pool and exiting" } pool $default_pool return } } # Store each entry in the data group line into a local variable set clientside [getfield $ppass " " 1] set serverside [string trimleft [getfield $ppass " " 2 ] "{" ] set newpool [string trimright [getfield $ppass " " 3 ] "}" ] # If serverside is in the form =match=replace=, apply regex if {$serverside starts_with "="} { set regex [getfield $serverside "=" 2] set rewrite [getfield $serverside "=" 3] if {[regexp -nocase $regex "$orig_host$orig_uri" 0 1 2 3 4 5 6 7 8 9]}{ # The clientside becomes the matched string and the serverside the substitution set clientside $0 set serverside [eval set X $rewrite] } else { pool $default_pool return } } if {$clientside starts_with "/"} { # No virtual hostname specified, so use the Host header instead set host_clientside $orig_host set path_clientside $clientside } else { # Virtual host specified in entry, split the host and path set host_clientside [getfield $clientside "/" 1] set path_clientside [substr $clientside [string length $host_clientside]] } # At this point $host_clientside is the client hostname, and $path_clientside # is the client-side path as specified in the data group set host_serverside [getfield $serverside "/" 1] set path_serverside [substr $serverside [string length $host_serverside]] if {$host_serverside eq ""} { set host_serverside $host_clientside } # At this point $host_serverside is the server hostname, and $path_serverside # is the server-side path as specified in the data group # In order for directory redirects to work properly we have to be careful with slashes if {$path_clientside equals "/"} { # Make sure serverside path ends with / if clientside path is "/" if {!($path_serverside ends_with "/")} { append path_serverside "/" } } else { # Otherwise, neither can end in a / (unless serverside path is just "/") if {!($path_serverside equals "/")} { if {$path_serverside ends_with "/"} { set path_serverside [string trimright $path_serverside "/"] } if {$path_clientside ends_with "/"} { set path_clientside [string trimright $path_clientside "/"] } } } if { $static::ProxyPassDebug } { log local0. "$log_prefix: Found Rule, Client Host=$host_clientside, Client Path=$path_clientside, Server Host=$host_serverside, Server Path=$path_serverside" } # If you go to http://www.domain.com/dir, and /dir is a directory, the web # server will redirect you to http://www.domain.com/dir/. The problem is, with ProxyPass, if the client-side # path is http://www.domain.com/dir, but the server-side path is http://www.domain.com/, the server will NOT # redirect the client (it isn't going to redirect you to http://www.domain.com//!). Here is the problem with # that. If there is an image referenced on the page, say logo.jpg, the client doesn't realize /dir is a directory # and as such it will try to load http://www.domain.com/logo.jpg and not http://www.domain.com/dir/logo.jpg. So # ProxyPass has to handle the redirect in this case. This only really matters if the server-side path is "/", # but since we have the code here we might as well offload all of the redirects that we can (that is whenever # the client path is exactly the client path specified in the data group but not "/"). if {$orig_uri eq $path_clientside} { if {([string index $path_clientside end] ne "/") and not ($path_clientside contains ".") } { set is_https 0 if {[PROFILE::exists clientssl] == 1} { set is_https 1 } # Assumption here is that the browser is hitting http://host/path which is a virtual path and we need to do the redirect for them if {$is_https == 1} { HTTP::redirect "https://$orig_host$orig_uri/" if { $static::ProxyPassDebug } { log local0. "$log_prefix: Redirecting to https://$orig_host$orig_uri/" } } else { HTTP::redirect "http://$orig_host$orig_uri/" if { $static::ProxyPassDebug } { log local0. "$log_prefix: Redirecting to http://$orig_host$orig_uri/" } } return } } if {$host_clientside eq $orig_host} { if {$orig_uri starts_with $path_clientside} { set bypass 0 # Take care of pool selection if {$newpool eq ""} { pool $default_pool if { $static::ProxyPassDebug > 1 } { log local0. "$log_prefix: Using default pool $default_pool" } set newpool $default_pool } else { pool $newpool if { $static::ProxyPassDebug > 0 } { log local0. "$log_prefix: Using parsed pool $newpool (make sure you have OneConnect enabled)" } } } } # If we did not match anything, skip the rest of this event if {$bypass} { return } # The following code will look up SNAT addresses from # the data group "ProxyPassSNATs" and apply them. # # The format of the entries in this list is as follows: # # # # All entries are separated by spaces, and both items # are required. set class_exists_cmd "class exists ProxyPassSNATs" if {! [eval $class_exists_cmd]} { return } set snat [findclass $newpool ProxyPassSNATs " "] if {$snat eq ""} { # No snat found, skip rest of this event return } if { $static::ProxyPassDebug > 0 } { log local0. "$log_prefix: SNAT address $snat assigned for pool $newpool" } snat $snat } when HTTP_REQUEST_SEND { # If we didn't match anything, skip the rest of this event if {$bypass} { return } # The following code does the actual rewrite on its way TO # the backend server. It replaces the URI with the newly # constructed one and masks the "Host" header with the FQDN # the backend pool server wants to see. # # If a new pool or custom SNAT are to be applied, these are # done here as well. If a SNAT is used, an X-Forwarded-For # header is attached to send the original requesting IP # through to the server. if {$host_clientside eq $orig_host} { if {$orig_uri starts_with $path_clientside} { if { $static::ProxyPassDebug > 1 } { log local0. "$log_prefix: New Host=$host_serverside, New Path=$path_serverside[substr $orig_uri [string length $path_clientside]]" } clientside { # Rewrite the URI HTTP::uri $path_serverside[substr $orig_uri [string length $path_clientside]] # Rewrite the Host header HTTP::header replace Host $host_serverside # Now alter the Referer header if necessary if { [HTTP::header exists "Referer"] } { set protocol [URI::protocol [HTTP::header Referer]] if {$protocol ne ""} { set client_path [findstr [HTTP::header "Referer"] $host_clientside [string length $host_clientside]] if {$client_path starts_with $path_clientside} { if { $static::ProxyPassDebug > 1 } { log local0. "$log_prefix: Changing Referer header: [HTTP::header Referer] to $protocol://$host_serverside$path_serverside[substr $client_path [string length $path_clientside]]" } HTTP::header replace "Referer" "$protocol://$host_serverside$path_serverside[substr $client_path [string length $path_clientside]]" } } } } } } # If we're rewriting the response content, prevent the server from using #compression in its response by removing the Accept-Encoding header #from the request. LTM does not decompress response content before #applying the stream profile. This header is only removed if we're #rewriting response content. clientside { if { $static::RewriteResponsePayload } { if { [HTTP::header exists "Accept-Encoding"] } { HTTP::header remove "Accept-Encoding" if { $static::ProxyPassDebug > 1} { log local0. "$log_prefix: Removed Accept-Encoding header" } } } HTTP::header insert "X-Forwarded-For" "[IP::remote_addr]" } } when HTTP_RESPONSE { if { $static::ProxyPassDebug > 1 } { log local0. "$log_prefix: [HTTP::status] response from [LB::server]" } if {$bypass} { # No modification is necessary if we didn't change anything inbound so disable the stream filter if it was enabled # Check if we're rewriting the response if {$static::RewriteResponsePayload} { if { $static::ProxyPassDebug > 1 } { log local0. "$log_prefix: Rewriting response content enabled, but disabled on this response." } # Need to explicity disable the stream filter if it's not needed for this response # Hide the command from the iRule parser so it won't generate a validation error #when not using a stream profile set stream_disable_cmd "STREAM::disable" # Execute the STREAM::disable command. Use catch to handle any errors. Save the result to $result if { [catch {eval $stream_disable_cmd} result] } { # There was an error trying to disable the stream profile. log local0. "$log_prefix: Error disabling stream filter ($result). If you enable static::RewriteResponsePayload, then you should add a stream profile to the VIP. Else, set static::RewriteResponsePayload to 0 in this iRule." } } # Exit from this event. return } # Check if we're rewriting the response if {$static::RewriteResponsePayload} { # Configure and enable the stream filter to rewrite the response payload # Hide the command from the iRule parser so it won't generate a validation error #when not using a stream profile if {$static::RewriteResponsePayload > 1} { set stream_expression_cmd "STREAM::expression \"@$host_serverside$path_serverside@$host_clientside$path_clientside@ @$path_serverside@$path_clientside@\"" } else { set stream_expression_cmd "STREAM::expression \"@$host_serverside$path_serverside@$host_clientside$path_clientside@\"" } set stream_enable_cmd "STREAM::enable" if { $static::ProxyPassDebug > 1 } { log local0. "$log_prefix: \$stream_expression_cmd: $stream_expression_cmd, \$stream_enable_cmd: $stream_enable_cmd" } # Execute the STREAM::expression command. Use catch to handle any errors. Save the result to $result if { [catch {eval $stream_expression_cmd} result] } { # There was an error trying to set the stream expression. log local0. "$log_prefix: Error setting stream expression ($result). If you enable static::RewriteResponsePayload, then you should add a stream profile to the VIP. Else, set static::RewriteResponsePayload to 0 in this iRule." } else { # No error setting the stream expression, so try to enable the stream filter # Execute the STREAM::enable command. Use catch to handle any errors. Save the result to $result if { [catch {eval $stream_enable_cmd} result] } { # There was an error trying to enable the stream filter. log local0. "$log_prefix: error enabling stream filter ($result)" } else { if { $static::ProxyPassDebug > 1 } { log local0. "$log_prefix: Successfully configured and enabled stream filter" } } } } # Fix Location, Content-Location, and URI headers foreach header {"Location" "Content-Location" "URI"} { set protocol [URI::protocol [HTTP::header $header]] if { $static::ProxyPassDebug > 1 } { log local0. "$log_prefix: Checking $header=[HTTP::header $header], \$protocol=$protocol" } if {$protocol ne ""} { set server_path [findstr [HTTP::header $header] $host_serverside [string length $host_serverside]] if {$server_path starts_with $path_serverside} { if { $static::ProxyPassDebug } { log local0. "$log_prefix: Changing response header $header: [HTTP::header $header] with $protocol://$host_clientside$path_clientside[substr $server_path [string length $path_serverside]]" } HTTP::header replace $header $protocol://$host_clientside$path_clientside[substr $server_path [string length $path_serverside]] } } } # Rewrite any domains/paths in Set-Cookie headers if {[HTTP::header exists "Set-Cookie"]}{ array unset cookielist foreach cookievalue [HTTP::header values "Set-Cookie"] { set cookiename [getfield $cookievalue "=" 1] set namevalue "" set newcookievalue "" foreach element [split $cookievalue ";"] { set element [string trim $element] if {$namevalue equals ""} { set namevalue $element } else { if {$element contains "="} { set elementname [getfield $element "=" 1] set elementvalue [getfield $element "=" 2] if {[string tolower $elementname] eq "domain"} { set elementvalue [string trimright $elementvalue "."] if {$host_serverside ends_with $elementvalue} { if {$static::ProxyPassDebug > 1} { log local0. "$log_prefix: Modifying cookie $cookiename domain from $elementvalue to $host_clientside" } set elementvalue $host_clientside } append elementvalue "." } if {[string tolower $elementname] eq "path"} { if {$elementvalue starts_with $path_serverside} { if {$static::ProxyPassDebug > 1} { log local0. "$log_prefix: Modifying cookie $cookiename path from $elementvalue to $path_clientside[substr $elementvalue [string length $path_serverside]]" } set elementvalue $path_clientside[substr $elementvalue [string length $path_serverside]] } } append newcookievalue "; $elementname=$elementvalue" } else { append newcookievalue "; $element" } } } set cookielist($cookiename) "$namevalue$newcookievalue" } HTTP::header remove "Set-Cookie" foreach cookiename [array names cookielist] { HTTP::header insert "Set-Cookie" $cookielist($cookiename) if {$static::ProxyPassDebug > 1} { log local0. "$log_prefix: Inserting cookie: $cookielist($cookiename)" } } } } # Only uncomment this event if you need extra debugging for content rewriting. # This event can only be uncommented if the iRule is used with a stream profile. #when STREAM_MATCHED { #if { $static::ProxyPassDebug } { #log local0. "$log_prefix: Rewriting match: [STREAM::match]" #} #} # The following code will look up SSL profile rules from # the Data Group ProxyPassSSLProfiles" and apply # them. # # The format of the entries in this list is as follows: # # # # All entries are separated by spaces, and both items # are required. The virtual server also will need to # have any serverssl profile applied to it for this to work. when SERVER_CONNECTED { if {$bypass} { return } set class_exists_cmd "class exists ProxyPassSSLProfiles" if {! [eval $class_exists_cmd]} { return } set pool [LB::server pool] set profilename [findclass $pool ProxyPassSSLProfiles " "] if {$profilename eq ""} { if { [PROFILE::exists serverssl] == 1} { # Hide this command from the iRule parser (in case no serverssl profile is applied) set disable "SSL::disable serverside" catch {eval $disable} } return } if { $static::ProxyPassDebug > 0 } { log local0. "$log_prefix: ServerSSL profile $profilename assigned for pool $pool" } if { [PROFILE::exists serverssl] == 1} { # Hide these commands from the iRule parser (in case no serverssl profile is applied) set profile "SSL::profile $profilename" catch {eval $profile} set enable "SSL::enable serverside" catch {eval $enable} } else { log local0. "$log_prefix: ServerSSL profile must be defined on virtual server to enable server-side encryption!" } } # ProxyPass Release History #v10.9: Nov 26, 2012: Used URI::basename to get the virtual server name. Thanks to Opher Shachar for the suggestion. #Replaced indentations with tabs intead of spaces to save on characters #v10.8: Oct 25, 2012: Updated the class name to remove the folder(s) (if present) from the virtual server name. # This assumes the ProxyPass data group is in the same partition as the iRule. #v10.7: Oct 24, 2012: Changed array set cookielist {} to array unset cookielist as the former does not clear the array. # Thanks to rhuyerman@schubergphilis.com and Simon Kowallik for pointing out the issue and this wiki page with details: http://wiki.tcl.tk/724 #v10.6: Oct 14, 2012: Updated how the protocol is parsed from URLs in request and response headers to fix errant matches #v10.5: Feb 2, 2012: Removed extra stream profile $result reference for debug logging. #v10.4: Nov 23, 2011: Removed an extra colon in sever HTTP::header replace commands to prevent duplicate headers from being inserted #v10.3: Sep 27, 2010: Moved rewrite code to HTTP_REQUEST_SEND to work with WebAccelerator # Fixed bug with cookie rewrites when cookie value contained an "=" #v10.2: Jun 04, 2010: Can handle individual file mappings thanks to Michael Holmes from AZDOE # Also fixed bug with directory slash logic #v10.1: Oct 24, 2009: Now CMP-friendly! (NOTE: use ProxyPass v8.2 for TMOS v9.x) #v10.0: May 15, 2009: Optimized for external classes in v10 only (use v8.2 for TMOS v9.x) # Added support for regular expressions and backreferences for the translations. # v8.2: Jun 04, 2010: Fixed bug with directory slash logic # v8.1: May 15, 2009: Added internal redirects back in (removing them was a mistake) # v8.0: May 13, 2009: pulled in changes submitted by Aaron Hooley (hooleylists gmail com) # TMOS v10 support added. Cookie domain/path rewriting added. # v7.0: May 6, 2008: added optional serverssl contributed by Joel Moses # v6.0: Jan 15, 2008: Small efficiency change # v5.0: Jul 27, 2007: Added Referer header conversions # v4.0: Jul 27, 2007: Added optional debugging flag # v3.0: Jul 20, 2007: Added SNAT support contributed by Adam Auerbach # v2.0: May 28, 2007: Added internal directory redirects and optional stream profile # v1.0: Feb 20, 2007: Initial Release Tested this on version: 10.0Log Http Headers
Problem this snippet solves: This simple rule logs all HTTP headers in requests and responses to /var/log/ltm. This can be helpful in troubleshooting. Code : when HTTP_REQUEST { set LogString "Client [IP::client_addr]:[TCP::client_port] -> [HTTP::host][HTTP::uri]" log local0. "=============================================" log local0. "$LogString (request)" foreach aHeader [HTTP::header names] { log local0. "$aHeader: [HTTP::header value $aHeader]" } log local0. "=============================================" } when HTTP_RESPONSE { log local0. "=============================================" log local0. "$LogString (response) - status: [HTTP::status]" foreach aHeader [HTTP::header names] { log local0. "$aHeader: [HTTP::header value $aHeader]" } log local0. "=============================================" } # Sample output: Rule log_http_headers_rule : ============================================= Rule log_http_headers_rule : Client 192.168.99.32:2950 -> webmail.example.com/exchange/Aaron/Inbox/?Cmd=contents (request) Rule log_http_headers_rule : Host: webmail Rule log_http_headers_rule : User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.8.1.9) Rule log_http_headers_rule : Accept: text/xml,application/xml,application/xhtml+xml,text/html;q=0.9,text/plain;q=0.8,im Rule log_http_headers_rule : Accept-Language: en-us,en;q=0.5 Rule log_http_headers_rule : Accept-Encoding: gzip,deflate Rule log_http_headers_rule : Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7 Rule log_http_headers_rule : Keep-Alive: 300 Rule log_http_headers_rule : Connection: keep-alive Rule log_http_headers_rule : Referer: https://webmail.example.com/exchange/ Rule log_http_headers_rule : X-Forwarded-For: 192.168.99.32 Rule log_http_headers_rule : Front-End-Https: On Rule log_http_headers_rule : ============================================= Rule log_http_headers_rule : ============================================= Rule log_http_headers_rule : Client 192.168.99.32:2950 -> webmail.example.com/exchange/Aaron/Inbox/?Cmd=contents (response) - status: 200 Rule log_http_headers_rule : Date: Tue, 06 Nov 2007 16 Rule log_http_headers_rule : Server: Microsoft-IIS/6.0 Rule log_http_headers_rule : X-Powered-By: ASP.NET Rule log_http_headers_rule : Content-Type: text/html Rule log_http_headers_rule : Content-Length: 55446 Rule log_http_headers_rule : MS-WebStorage: 6.5.7638 Rule log_http_headers_rule : Cache-Control: no-cache Rule log_http_headers_rule : =============================================UDP TCP Packet Duplication
Problem this snippet solves: This iApp provides full configuration of UDP/TCP packet duplication. It is commonly used to duplicate Syslog, SNMP Traps, Netflow, and Sflow data streams to multiple vendor solutions or customers. It also provides fault tolerance capabilities within each duplicated destination. By pointing Network devices, Appliances, and Servers to a VIP distributing network management traffic modifying distribution of streams can be done in one centralized location. UDP packets retain the original source address when sending to the destination locations. Notes: Prior to 11.5 you must add an IPv6 address to any interface to allow for HSL traffic to be sent to the distribution virtual fdf5::1/64 fdf5::2/64 for an HA pair would do it.* TCP traffic does not maintain original source Internal F5 Resources can demo this solution within the UDF environment using the blueprint named "Traffic Duplication Demo" Contributed by: Ken Bocchino 20200807 - Updated to v2.2 How to use this snippet:Microsoft Skype for Business Server 2015
Problem this snippet solves: New release candidate iApp template and deployment guide for Microsoft Skype for Business Server 2015 (formerly Lync Server 2010/2013). For more information and complete guidance on configuring the iApp template, see the associated deployment guide: http://www.f5.com/pdf/deployment-guides/microsoft-skype-for-business-dg.pdf f5.microsoft_skype_server_2015.v1.0.0rc9: posted to downloads.f5.com in 11/2017 RC-9 was posted to downloads.f5.com (as will most new versions of this template). It contained the following changes: new BIG-IP AFM IP Intelligence threat categories to support BIG-IP v13.1 and support for route domain 0 from non-Common partitions. f5.microsoft_skype_server_2015.v1.0.0rc7: posted 09/21/2016 RC-7 provides additional SIP domain support within reverse proxy, a monitor schema change for reverse proxy to make use of the 200 OK response when querying lyncdiscover/lyncdiscoverinternal, support for the director service standalone use case(separate LTM from Front End service), added support to ask for the IP phone update url to allow connections through reverse proxy and added a port 80 Virtual Server in addition to the existing 443 Virtual Server for reverse proxy. RC 5 and 6 were never released to the public, this includes changes as a part of those RC's f5.microsoft_skype_server_2015.v1.0.0rc4: posted 02/16/2016 RC-4 Fixes a security log profile error when deploying on versions of BIG-IP earlier than 11.4, where AFM is not available. f5.microsoft_skype_server_2015.v1.0.0rc3: posted 01/22/2016 RC-3 attaches a supplemental ICMP monitor to the Edge internal UDP virtual server. See https://support.f5.com/kb/en-us/solutions/public/6000/100/sol6143.html for more information. f5.microsoft_skype_server_2015.v1.0.0rc2: posted 01/11/2016 RC-2 contains only a small correction to the iRule produced by the iApp template. The iApp will now always force the FQDN written to lowercase in the iRule, even if the user enters CAPITAL letters. f5.microsoft_skype_server_2015.v1.0.0rc1: posted 07/06/2015 New iApp template for Skype for Business. Code : 70782
