adfs
28 TopicsBig-IP and ADFS Part 5 – “Working with ADFS 3.0 and SNI”
Can you believe it? It’s true, it’s true! There’s a part 5. What can I say? Times change; people change; software changes. Active Directory Federation Services, (ADFS) is no exception. While the BIG-IP with SAML 2.0 can alleviate the need for and ADFS infrastructure in many use cases, there are still organizations that need/want to continue utilizing ADFS. Fortunately, regardless of which way you go, F5 can help. So, in the spirit of free will, collaboration, and serving the greater good, (too much?), let’s talk about load balancing ADFS 3.0 with the BIG-IP. As you may, or may not, recall the previous posts around BIG-IP and ADFS revolved around load balancing ADFS 2.0 and ADFS Proxy, replacing the ADFS Proxy with Access Policy Manager, and replacing the entire ADFS infrastructure with APM and SAML. The good news is that these posts are still relevant with regards to ADFS 3.0 and the ADFS proxy replacement, (WAP); well for the most part anyway. ADFS and SNI While there are numerous differences between ADFS 3.0 and previous versions, the most significant change with respect to providing HA and scalability for the ADFS 3.0 infrastructure is its use of Server Name Indication, (SNI). To Successfully integrate a load balancing solution, ( including full reverse proxy), into the ADFS environment the device must support SNI. The load balancing device must be able to present the server name to the backend host as part of the initial Client Hello. Fortunately, the BIG-IP, (ver. 11.1.0 and later) supports this TLS protocol extension. The rest of this post will provide guidance on enabling SNI support for ADFS 3.0 integration. For overall guidance refer to parts one thru three of this series as well as the recently published ADFS 2.0 Deployment Guide. SNI and the Server Profile The BIG-IP provides a virtual server, (listener), that receives client SSL connections and subsequently intelligently passes traffic into a pool of ADFS/WAP servers. Depending upon the organization’s infrastructure and security requirements, the BIG-IP can simply receive encrypted client connections and pass them through to the backend ADFS farm, (aka SSL tunneling). However, the preferred method, (SSL bridging), receives encrypted clients connections; terminates and decrypts the traffic. The traffic is then re-encrypted and sent to the backend application servers. This method adds an additional layer of security since external traffic never directly connects to the internal domain-joined machines as well affording the ability to perform additional deep packet inspection. SSL bridging back to the ADFS farm requires associating a server SSL profile to the virtual server. Enabling SNI is simply a matter of specifying the server name on the associated server SSL profile, (see below). 1. Navigate to the appropriate profile; 2. Select ‘Advanced’ configuration and enter the FQDN of the backend ADFS service hostname. The hostname will now be provided during the TLS negotiation. In the example below, the server name is ‘fs.f5demo.net’, (refer to the highlighted field). Like I said, simple! Health Monitoring and SNI Effectively monitoring the backend ADFS/WAP farm members is a little trickier but very doable. Since the built-in HTTP monitors do not provide the server name as part of the TLS negotiation, using them will result in the being backend servers being incorrectly marked as down, (not good). You could simply use a non-HTTP monitor, (ICMP being the most common), but that doesn’t provide a reasonable guarantee that the actual ADFS service is functioning. Better than that, what we can do is create an external custom SNI enabled monitor that validates the service metadata and associate it to the pool. It’s as easy as 1,2,3,…..um.. 4,5,6. 1. Download the script: http://www.f5.com/pdf/deployment-guides/sni-eav.zip 2. Upload the previously downloaded file into the BIG-IP via the web interface. Navigate to ‘System’ –> ‘External Monitor Program List’ –> ‘Import’; IMPORTANT!!! If ADFS proxy server is configured to accept SSL/TLS connections only using TLSv1.1 or better , the monitor will not work. If have come up with this one-liner to replace the “curl” based command in the script. Thanks to Jerry Tower for helping fix the actual HTTP request as well as testing the script. (echo -e "GET $URI HTTP/1.1\r\nHost: $HOST\r\nConnection: Close\r\n\r\n"; sleep 2) | openssl s_client –quiet –servername $HOST -connect $NODE:$PORT 2> /dev/null| grep -i "$RECV" 2>&1> /dev/null The script line that this one-liner should replace is the following: curl-apd -k -v -i --resolve $HOST:$PORT:$NODE https://$HOST$URI | grep -i "${RECV}" 2>&1 > /dev/null 3. Browse to and select the file. Provide a name for the file and select ‘Import’; 4. Create a new external monitor utilizing the associate external file. Navigate to ‘Local Traffic’ –> ‘+’ sign; 5. Provide a name and select ‘External’ for the type. Select the previously created external program. The script provided requires three, (3) variables entered as name/value pairs. The variables are listed below. Select ‘Finished’; Name Value RECV HTTP/1.1 200 URI /FederationMetadata/2007-06/FederationMetadata.xml HOST 6. Associate the newly created monitor to the ADFS pool and/or the WAP pool. Select ‘Local Traffic’ –> ‘Pools’ –> ‘Pool List’. Move the monitor into the active pane and select ‘Update’. Additional Links: Big-IP and ADFS Part 1 – “Load balancing the ADFS Farm” Big-IP and ADFS Part 2 – “APM–An Alternative to the ADFS Proxy” Big-IP and ADFS Part 3 – “ADFS, APM, and the Office 365 Thick Clients” Big-IP and ADFS Part 4 – “What about Single Sign-Out?” BIG-IP Access Policy Manager (APM) Wiki Home - DevCentral Wiki Active Directory Federation Services 3.0 Overview5.6KViews1like24CommentsAPM Cookbook: SAML IdP Chaining
As an APM subject mater expert at F5 I often find myself in situations where a customer or colleague needs an example of a particular configuration. While most of these requests are easily handled with a call or WebEx I'm a firm believer in sharing knowledge through documentation.. and I don't like getting calls at 3 AM. If you're like me you grew up with the O'Reilly Cookbook series which served as a great reference document for various development or server configuration tasks. My goal is to create a similar reference resource here on DevCentral for those one-off scenarios where a visual example may help your complete your task. For the first APM Cookbook series I'll discuss SAML IdP chaining. Overview Security Assertion Markup Language, more commonly known as SAML, is a popular federated authentication method that provides web based single sign-on. One of the key security advantages to SAML is the reduction in username/password combinations that a user has remember... or in my experience as a security engineer the number of passwords written on a post-it note stuck to their monitor. There are two major services in a SAML environment: IdP - Identity Provider SP - Service Provider The identity provider is the SAML service that authenticates the user and passes an assertion to then service providers proving the user's identity. F5's APM performs both IdP and SP services and allows customers to easily deploy federated authentication in their environment. In more complex scenarios you may run across a requirement where multiple SAML IdPs need to be chained together. This comes up from time to time when customers have contractors that utilize federated authentication for authorization to corporate resources. Example For our configuration we have the Globex Corporation that uses APM to authenticate uses to Office 365. Globex hire contractors from Acme Corp. who authenticate using the Acme Corp. ADFS environment. However, since Office 365 is configured to authenticate against the Globex APM we need to convert the Acme Corp. SAML assertion into a Globex SAML assertion, which is known as IdP chaining. The step ladder for this process is shown below: 1. User requests https://outlook.com/globex.com 2 - 3. Office 365 redirects user to idp.globex.com 3 - 4. idp.globex.com determines user is a contractor and redirect user to sts.acme.com 5 - 8. User authenticates using Acme credentials and is then redirect back to idp.globex.com 9. idp.globex.com consumes the Acme SAML assertion and creates a Globex SAML assertion 10. User is redirected back to Office 365 11 - 12. Office 365 consumes the Globex SAML assertion and displays the user's mail Configuration To configure your APM SAML IdP to accept incoming assertion from sts.acme.com we need to create an external SP connector. Under the Access Policy -> SAML -> BIG-IP as SP configuration section: 1. Create a new SAML SP Service 2. Export the SP metadata and configure sts.acme.com accordingly (follow your IdP vendor's documentation) 3. Click the External IdP Connectors menu at the top 4. Click the dropdown arrow on the create button and choose From Metadata (import the metadata from sts.acme.com) 5. Bind the Local SP service to the external IdP connector Now that idp.globex.com and sts.acme.com are configured to trust one another we need to configure the APM IdP to consume the sts.acme.com SAML assertion. The IdP's Visual Policy Editor should look similar to the image below: 1. The Decision Box asks the user what company they're with. This is a simple example but more elaborate home realm discovery techniques can be used. 2. The SAML Auth box is configured to consume the sts.acme.com assertion 3. Since we no longer have a login form on the IdP we need to set a few APM session variables: session.logon.last.username = Session Variable session.saml.last.identity session.logon.last.logonname = Session Variable session.saml.last.identity 4. Create an Advanced Resource Assign that matches your existing IdP Advance Resource Assign. Conclusion This particular post was a little longwinded due to the steps required but overall is a fairly simple configuration. So the next time someone asks if your F5 can do IdP chaining you can confidently reply "Yes and I know how to do that".4.1KViews1like7Comments