VIPRION DSC between vGuest on the same chassis
Hi, I know it makes not much sense (but when each vGuest is assigned to separate blade?) to create such config but I am curious if it is technically possible or not. In some documents I can see: Members of a Sync-Failover device group should each run on a separate chassis - Overview of vCMP configuration considerations - this is for versions up to 12.1.0 (but includes 11.6.0) For Sync-Failover device groups, each device group member must run on a chassis separate from the other members. - BIG-IP vCMP hosts and guests configuration options - this is for versions up to 11.6.0 So should or must? Or something changed for 12+ Piotr
Viprion 2250 AOM Network Access
After reviewing SOL9403 it would appear that their is no support for setting an IP address to access AOM via the MGMT Interface and that the only way to access AOM is via the console port. Can someone confirm that this is true? Are their any other Lights Out Management Options available on the Viprion 2400 platform? Our primary use case is to monitor chassis/blade upgrades, reboots and run EUD if required. I should also mention that we currently only have one 2250 blade. Thanks.