cancel
Showing results for 
Search instead for 
Did you mean: 

Creating a CSR and Key from LTM

faadi777
Nimbostratus
Nimbostratus

Hi,

I would like ot know the procedure for creating CSR, key and importing the certificate on LTM v 13. I am using configuration utility. I have seens some procedures but I do not see procedure for generating key using config utility?

Can you please guide?

1 ACCEPTED SOLUTION

Hi @faadi777 ,

When you create CSR on the F5, there are fields for the key properties e.g. key type and size. So once you finish it, private key is also generated simultaneouly. Key should be available under below section.

Mayur_Sutare_0-1659925115676.png

You can refer section 'Create an SSL CSR and private key' under below ref article.

https://support.f5.com/csp/article/K14620#2 

 

Hope it helps!

 

View solution in original post

1 REPLY 1

Hi @faadi777 ,

When you create CSR on the F5, there are fields for the key properties e.g. key type and size. So once you finish it, private key is also generated simultaneouly. Key should be available under below section.

Mayur_Sutare_0-1659925115676.png

You can refer section 'Create an SSL CSR and private key' under below ref article.

https://support.f5.com/csp/article/K14620#2 

 

Hope it helps!