Was this article helpful?
Hi John,
I know this is a really late question but I am checking/learning AFM but quite confused regarding “Rate Increase”.
To "Rate Increase" ( "Dectection %" in newer versions), does AFM really drops/rate limits packets when traffic over that percentage? Because in:
" From the Detection Threshold Percent list, select Specify or Infinite. Use Specify to set a value (in percentage of traffic) for the attack detection threshold. If packets of the specified types cross the percentage threshold, an attack is logged and reported. The system continues to check every second, and registers an attack for the duration that the threshold is exceeded. "
So it sounds AFM just report but won't drop packets when traffic over the percentage threshold. Is it correct or any behavior change in v13 or v14?