Was this article helpful?
NimbostratusHi,
Nice, clean configuration and explanation.
One question.
I have created a dns cache with forward zones. Each zone has a set of different nameservers configured.
The cache looks like this:
ltm dns cache resolver dns_cache_1 {
answer-default-zones yes
forward-zones {
. {
nameservers {
10.10.10.10:53 { }
10.10.10.11:53 { }
}
}
zone1.com. {
nameservers {
10.11.11.10:53 { }
10.11.11.11:53 { }
}
}
zone2.com. {
nameservers {
10.11.11.10:53 { }
10.11.11.11:53 { }
}
}
}
partition DNS_RESOLVER
route-domain /Common/100
}
At the moment, from what I can tell, the F5 will use the self IP address of the egress interface when querying those nameservers.
Is it possible to tweak this in to using another address? I tried using source-address-translation under the dns listener but no luck.
It does not have to be different IP address source depending on which set of nameservers to query. Just that it uses another IP address then the self IP's.
Is an iRule the way to go here?
We have the F5 set up in a one-armed fashion.
Thanks in advance for any comments, suggestions and solutions.