Forum Discussion

Testimony's avatar
Testimony
Icon for Nimbostratus rankNimbostratus
Jul 03, 2020

VIRTUAL SERVER ISSUE

I configured two different pools on different ports (80 and 443). both pools have the same virtual server with it VIP. The pool on port 80 was used as a trial for the project while the pool on 443 wa...
application delivery
LTM
TMOS
Mayur_Sutare's avatar
Mayur_Sutare
Icon for MVP rankMVP
Jul 06, 2020

Hello, thanks for sharing details. As per attached snaps, I can see you have enabled https_443 health monitor under pool but both pool members are showing offline so the pool itself is down. It seems the service 443 is not up and running on your web servers. You can verify it by doing telnet web-server-IP on 443 from the system where your web-server will be reachable. Telnet will fail. So to troubleshoot further, please check below points -

 

 

1.     Service 443 is properly mapped with your application on the web-server.

2.     Certificate is properly mapped.

3.     Local Firewall is not restricting the incoming traffic on the web-server.

 

If telnet is successful from your system, you also need to check if web-server is reachable from F5.

 

Hope it helps!

Mayur