Forum Discussion

Luke_Drake_2645's avatar
Luke_Drake_2645
Icon for Nimbostratus rankNimbostratus
Sep 21, 2017

VIP to VIP traffic on different BIGIP's

Here is the setup:

 

Client -> VIP on production LTM -> Cisco ASA/NAT -> VIP on test LTM -> Pool -> Server

 

I'm fairly green at F5, and this configuration isn't something I am familiar with. Is this something I would do in an iRule? If so, does anybody have an example of how I would write it? If I had to redirect to a different URL, I could create a separate A record in DNS pointing to the VIP in test.

 

application delivery
LTM
  • P_K's avatar
    P_K
    Icon for Altostratus rankAltostratus
    Sep 21, 2017

    See below setup:

     

    Client --> VIP1(Big-IP 1) --|ASA|-->VIP2(Big-IP 2)-->Pool-->Server

     

    1. Configure VIP1 on Big-IP 1
    2. Create a Pool with VIP2 as pool member on Big-IP 1.
    3. Assign above pool to VIP1 on Big-IP 1.
    4. Create VIP2 on Big-IP 2.
    5. Create Pool with your servers on Big-IP2.
    6. Assign above pool to VIP2. This is fairly simple setup.

       

      Note: Make sure your ASA allows access from Big-IP 1 to VIP2 on Big-IP 2.

    Hope this helps!