Forum Discussion

mnb_63148's avatar
mnb_63148
Icon for Nimbostratus rankNimbostratus
Oct 09, 2014

Upgrading from version 11.3 HF8 to 11.5.1 HF 5

We are upgrading our LTMs from 11.3 HF8 to 11.5.1 HF5. Under the "installed images" section in Software Management, there are three boot locations (MD1.1, MD1.2, and MD1.3). If I add the base image f...
Kevin_K_51432's avatar
Kevin_K_51432
Historic F5 Account
Oct 09, 2014

Hi MNB, You won't really be upgrading the 10.2 software per say. If you kick off the install from the 11.3.0, it will simply overwrite the 10.2 volume using the 11.3.0 config and the 11.5.0 software. Hope this makes sense. You should end up with:

MD1.1    BIG-IP   11.3.0  2806.0      no  complete
MD1.2    BIG-IP   11.3.0  3144.0     yes  complete
MD1.3    BIG-IP   11.5.0  0.0.221      no  complete
mnb_63148's avatar
mnb_63148
Icon for Nimbostratus rankNimbostratus
Oct 09, 2014
I should probably clarify. I have LTMs on version 11.3HF8, which is what my first question was regarding. Everyone answered my question in that the base image is rolled into the Hotfix and I do not need to install the base image to a separate volume. The second question was regarding a different LTM that has version 10.2 as the active volume. It looks like this: Sys::Software Status Volume Product Version Build Active Status -------------------------------------------------- MD1.1 BIG-IP 10.2.3 112.0 yes complete MD1.2 BIG-IP 11.1.0 1943.0 no complete MD1.3 none none none no complete I am guessing I can make the same changes and just apply 11.5.1 HF5 to MD1.3 and not have to install a base image for 11.5.1 to MD1.1 or MD1.2 in order for 11.5.1 HF5 on MD1.3 to work. Thanks.