Forum Discussion

Cirrostratus

Dec 08, 2022

Unable to add virtual server to F5

Hello All, We have added F5 Image in EVE-NG and attached Virtual PC to Interface 1.1. We have configured F5 for LTM. We are able to access Internet from F5 and also ping Interface IP(1.1). Interfac...

security

mihaic

MVP

Dec 08, 2022

So I made it work.

Interf 1.1 is in vlan 100 and 1.3 is in vlan 200.

Net is the management network.

I've added something similar called Net2, but attached to interface 1.3 in my case.

Created the vlan (vlan200 in my case), self-IP. Then I created a forwarding IP VIP with 0.0.0.0/0 for source and destination, no SNAT, and selected the source VLAN from where I am expecting the traffic to originate from. VLAN100 in my case.

Also I've had to add a static route on my firewall(not in the picture) to subnet in vlan100 where the Desktop is and point it to F5 ip in vlan200.

and that's it

srinidhi12

Cirrostratus

Dec 09, 2022

Hello,

Thanks for your response. It was rellay helpful in understanding the setup. We just have one question regarding the Virtual Server creation.

As you suggested, we have re-created the lab as per yours. Please find the image below.

Also Assigned VLAN_2 to Interface 1.3 and created Self-IP. Interface status is showing as UP. Image below

We created Virtual server and kept type as forward IP with 0.0.0.0/0 for Source and Destination IP. Assigned VLAN associated with Interface 1.1 which is directly connected with Virtual PC. Image below