Trunk Configuration on BIG-IP LTMs

Dear All, as i've promised you before, i've tested the trunk configuration between nexus switches and F5-LTMs. The new thing i realized is the F5-LTM puts only one link active of each port-channel and put other ports to suspended mode! Also it's recommended to put LACP negotiation mode to passive mode on F5-LTM side and put it active on switch side. i've checked the HA test between them also, when i plugged out the cable that is connected to active port, the other port changed to active mode. So everything is OK with F5, no issue. The important thing here is that when you are using Port-channel between F5-LTM and switch, F5 doesn't change the B.W. of this port-channel and the total B.W. is as the same before, but it's not matter, because finally Throughput is important. I hope these new tips help you all...