Telnet test from tmsh

Is run /util bash an option, you could then run telnet from there. If not I suspect this isn't possible.

That didn't work, I can't believe that you can't telnet from within TMSH, this is version 11.1, iif anyone knows please let me know, hank you.

OK, I guess you only have the option of using the run util test-monitor... command, it should suffice.

Not telnet, but have you considered using traceroute w/TCP? The syntax would be:

run util traceroute -T -p 22 

It times out just like regular traceroute if the destination cannot be reached. Seems to work fine on v11.1 and v11.2.

That worked, thank you so much. FW port seem to be opened...

 

Have you btw seen where you run the gtm_add and get stuck at the "enter root password if prompted" ?

 

 

 

alm@nygtm01(Active)(/Common)(tmos) run gtm gtm_add

 

WARNING: Running this script will wipe out the current configuration

 

files (bigip_gtm.conf, named.conf and named zone files) on the BIG-IP GTM

 

Controller on which this script is run. The configuration will be

 

replaced with the configuration of the remote BIG-IP GTM Controller

 

in the specified sync group

 

The local BIG-IP GTM MUST already be added in the configuration of the

 

other GTM.

 

 

Are you absolutely sure you want to do this? [y/n] y

 

 

Enter the IP address of a remote GTM BIG-IP from which

 

you want to copy the configuration:

 

10.5.10.28

 

 

==> Running 'bigstart shutdown gtmd' on the local system

 

==> Running 'bigstart shutdown zrd' on the local system

 

==> Running 'bigstart shutdown named' on the local system

 

Retrieving remote and installing local BIG-IP's SSL certs ...

 

Enter root password if prompted

 

ssh: connect to host 10.5.10.28 port 22: Connection timed out

 

ERROR: Can't read remote cert via /usr/bin/ssh.

 

 

Restarting gtmd

 

Restarting named

 

Restarting zrd