Forum Discussion
ssjyoti805_1692
Nimbostratus
Nimbostratussync failover issue
This is the scenario, all ip address are of /16 subnet mask
I am using vertual machines on my vmware platform, version is 11.3
First box configuration
Vertual server ip 10.10.1.1...
Andy_McGrath
Cumulonimbus
CumulonimbusTime is realy important so check the time and set NTP if you can. Also check the ConfSync IP's on each system, I would also set this to be the HA VLAN and IP addresses, this can be done under the following on both systems: Device Management, Devices, , Device Connetiviy, ConfSync
Do the same for the Network Failover under: Device Management, Devices, , Device Connetiviy, Network Failover (delete all but the HA VLAN IPs)
Go back and try to do the initial sync if that works you can then test network failover.
