SNMPv3 Configuration for Solarwind

Hello humi,

I think you must set here: System ›› SNMP : Agent : Configuration

the IP for Solarwinds,

and then to set here: System ›› SNMP : Agent : Access (v3)

the other stuff regarding the settings in Solarwinds plus

OID = .1.3.6.1

I hope this will help.

Regards,

Preslav

System > SNMP > Agent > Configuration Add your SolarWinds IP as the host and click add. This will whitelist that SNMP server to probe the F5.

System > SNMP > Agent > Access (v3) Create > Username an Auth/Priv information. OID: .1

Network > Self IPs > Your incoming interface for SNMP > Verify "Allow Default" is allowed on the port lock down, otherwise add SNMP service to the port list with "Allow Custom"

Also see: https://support.f5.com/kb/en-us/products/big-ip_ltm/manuals/product/tmos-implementations-11-1-0/20.html

From the link https://support.f5.com/csp/article/K13625

OIDNot ApplicableSpecifies the object identifier for this SNMPv3 access record. This provides access restriction to a specific OID, or OID tree. Setting the OID to .1 allows access to all OIDs on the device.