Forum Discussion
Deee-blue_14536
Nimbostratus
NimbostratusSFlow routing
Hi All,
I want to setup SFlow sending to a Solarwinds(SW) server. The standard polling is between the SW server and the mgmt. port. Will SFlow use the same mgmt. interface and route or will I n...
"sFlow traffic will use only the self IP address of the BIG-IP system as the egress interface": https://support.f5.com/kb/en-us/solutions/public/15000/100/sol15193.html
Not possible to use the management interface since 11.4.0.
Deee-blue_14536Nimbostratus
NimbostratusThanks for the reply Eric. Do you know why the destination address must be in a local subnet?
Deee-blue_14536Nimbostratus
NimbostratusThanks. I understand the possibility of mgmt. interface saturation but was curious why the destination would be limited to a local subnet. I've linked the Sflow output to a local firewall and NET'td the connection. I just need to get data through the device to see if it all works. I'll add a post once once I have it working.
Thanks for you responses they're greatly appreciated.