Forum Discussion
jugi8000_47873
Nimbostratus
Nimbostratussetting up redundant pair
Hi all!
I have 2 f5 big ip´s and try to set up a redundant pair. Am I able to set it up with graphic user interface? I have managed to make it work as a standalone but now I have proble...
The_BhattmanNimbostratus
NimbostratusThe only way to set it up is via the GUI.
Here is the following criteria for setting up HA (Basic setup)
1. You need to connect the 2 LTMs via Serial Cable (Special one provided by F5.).
2. Create a VLAN and create a self-address on each
Example:
BIGIP1
- VLAN Internal
- Self Address: 192.168.1.2
- Floating Address: 192.168.1.1
- VLAN External
- Self Address: 192.168.2.2
- Floating Address: 192.168.2.1
BIGIP1
- VLAN Internal
- Self Address: 192.168.1.3
- Floating Address: 192.168.1.1
- VLAN External
- Self Address: 192.168.2.3
- Floating Address: 192.168.2.1
Hope this helps.
CB
