Set VLAN and Tunnel Traffic to All VLANs and Tunnels via tmsh

Well, as last resort I tried: tmsh mod ltm virtual name vlans none vlans-disabled and it worked - not very intuitive I guess Same result is when tmsh mod ltm virtual name vlans default vlans-disabled is used Piotr

Hi,

Below my bash script for manipulating VLAN Enabled on. Probably not perfect one but it's working quite OK for bulk changes 🙂

Be advised, end of lines should be Unix style, so just LF, not CRLF

Specify virtuals to manipulate by virtual name

! /bin/bash

 Find by virtual name from $1 (can use RegEx)
 Set VLANs and Tunnels to Enabled on using VLAN from $3 based on operation in $2
 $2 values:
  add  Add items to the set
  def  Reset to the default value - no $3 necessary
  del  Delete specific items from the set
  non  Remove all items from the set, no access from any VLAN will be possible - no $3 necessary
  rep  Replace the set with a new set

 Warning: For rep operation previously set VLANS are deleted and
 replaced with new VLAN

output=$(tmsh list ltm virtual | grep "ltm virtual" | awk -F" " '{ print $3 }' | grep $1)

for LINE in ${output}; do
   echo ${LINE}

     case "$2" in
        add)
            tmsh mod ltm virtual ${LINE} vlans add { $3 } vlans-enabled ;;
        def)
            tmsh mod ltm virtual ${LINE} vlans default vlans-disabled ;;
        del)
            tmsh mod ltm virtual ${LINE} vlans delete  { $3 }
            test=$(tmsh list ltm virtual one-line | grep "vlans {" | awk -F" " '{ print $3 }' | grep $1)
            echo $test
            if [ "$test" = '' ]; then
                echo "Last VLAN deleted"
                tmsh mod ltm virtual ${LINE} vlans default vlans-disabled
            fi ;;
        non)
            tmsh mod ltm virtual ${LINE} vlans none ;;
        rep)
            tmsh mod ltm virtual ${LINE} vlans replace-all-with { $3 } vlans-enabled ;;
    esac

done

Specify virtuals by VLAN name currently set as Enabled on

! /bin/bash

 Find virtuals with VLAN enbled on specified in $1 set VLAN to value in $3
 based on operation in $2
 $2 values:
  add  Add items to the set
  def  Reset to the default value - no $3 necessary
  del  Delete specific items from the set
  non  Remove all items from the set, no access from any VLAN will be possible - no $3 necessary
  rep  Replace the set with a new set

 Warning: For rep operation previously set VLANS are deleted and
 replaced with new VLAN

output=$(tmsh list ltm virtual one-line | grep "vlans {.*\ $1\ " | awk '{ print $3 }')
for LINE in ${output}; do
   echo ${LINE}

     case "$2" in
        add)
            tmsh mod ltm virtual ${LINE} vlans add { $3 } vlans-enabled ;;
        def)
            tmsh mod ltm virtual ${LINE} vlans default vlans-disabled ;;
        del)
            tmsh mod ltm virtual ${LINE} vlans delete  { $3 }
            test=$(tmsh list ltm virtual ${LINE} one-line | grep "vlans {" | awk -F" " '{ print $3 }')
            echo $test
            if [ "$test" = '' ]; then
                echo "Last VLAN deleted"
                tmsh mod ltm virtual ${LINE} vlans default vlans-disabled
            fi ;;
        non)
            tmsh mod ltm virtual ${LINE} vlans none ;;
        rep)
            tmsh mod ltm virtual ${LINE} vlans replace-all-with { $3 } vlans-enabled ;;
    esac

done

Piotr