Forum Discussion
Paul_Taylor_110
Nimbostratus
NimbostratusRestoring Config onto different unit - odd results
We have three BIG-IP LTM's. Two are running in an HA pair at our main datacenter (bigip1 and bigip2) and a third unit is at our DR site (bigip3). I've been using the ConfigSync.pl script ...
Paul_Taylor_110Nimbostratus
NimbostratusHere's what shows up when I do this via command line:
[root@bigip3:Active] ucs b config install bigip2_full.ucs
Saving active configuration...
Current configuration backed up to /var/local/ucs/cs_backup.ucs.
Product : BIG-IP
Version : 10.2.2
Hostname: UCS : bigip2.winndixieus.wd.com
System: bigip3.winndixieus.wd.com
Installing --shared-- configuration on host bigip3.winndixieus.wd.com
Installing configuration...
Post-processing...
Reading configuration from /config/low_profile_base.conf.
Reading configuration from /defaults/config_base.conf.
Reading configuration from /config/bigip_sys.conf.
Reading configuration from /config/bigip_base.conf.
Reading configuration from /usr/share/monitors/base_monitors.conf.
Reading configuration from /config/profile_base.conf.
Reading configuration from /config/daemon.conf.
Reading configuration from /config/bigip.conf.
Reading configuration from /config/bigip_local.conf.
Loading the configuration ...
[root@bigip3:Standby] ucs
Even though it says it installed the shared configuration, all the Self-IPs on bigip3 are identical to bigip2, and it thinks it's part of an HA pair.