full-proxy HTTP2

Please refer link here

https://techdocs.f5.com/en-us/bigip-15-1-0/big-ip-http2-full-proxy-configuration/http2-full-proxy-configuring.html

 

for the benefit of other here is a ready reference, in case in future the link content changes or link disappear:

Configuring HTTP/2 Full-proxy Support on the BIG-IP System

Overview: HTTP/2 full-proxy configuration

When your application server infrastructure is composed of HTTP/2-enabled servers, you can take advantage of the HTTP/2 acceleration features that the BIG-IP system provides. Most importantly, the BIG-IP system includes full-proxy support for the HTTP/2 protocol. This means that the BIG-IP system can process HTTP/2 requests and responses on both the client and server sides of the BIG-IP system.

The HTTP/2 full-proxy architecture provides greater network efficiency by allowing the BIG-IP system to transport multiple simultaneous, bi-directional streams of messages between the client and server. This is accomplished through the use of the BIG-IP system’s message-routing proxy, instead of the traditional connection-oriented TCP proxy.

This figure shows an example of the Acceleration area of the New Virtual Server screen, where you configure some key settings for successful HTTP/2 full-proxy operation.

 

 

HTTP/2 full-proxy configuration summary

To configure HTTP/2 full-proxy support on the BIG-IP system, you can use the BIG-IP Configuration utility.

When you create the virtual server, make sure that you select the 

HTTP MRF Router

 option. You will also assign two existing SSL profiles to the virtual server, 

clientssl-secure

 and 

serverssl-secure

.

This illustration shows the tasks required to deploy an HTTP/2 full-proxy configuration.

 

 

Configuration constraints

These BIG-IP features are not supported for an HTTP/2 full-proxy deployment:

OneConnectThe session persistence types Hash and SSL.Connection mirroring in high-availability configurations.The Virtual Desktop Infrastructure (VDI) is not supported in HTTP/2 environment. Do not attach both HTTP/2 profile and VDI profile together in the virtual server.

The HTTP/2 protocol is not compatible with NTLM protocols.

Create a custom HTTP profile for HTTP/2 full-proxy configuration

Part of configuring an HTTP/2 full-proxy configuration on the BIG-IP system is to first create a standard HTTP profile. An HTTP profile defines the way that you want the BIG-IP system to manage HTTP traffic.

For the most expedient HTTP/2 full-proxy configuration, you can create a single HTTP profile that the BIG-IP system will apply to both client-side and server-side HTTP traffic. Alternatively, if you want the BIG-IP system to manage client-side and server-side traffic in different ways, you can create two separate HTTP profiles and configure the settings differently in each profile.

On the Main tab, click 

Local Traffic

 

Profiles

 

Services

 

HTTP

 

.

The HTTP profile list screen opens.

Click 

Create

.

The New HTTP Profile screen opens.

Type a unique 

Name

 for the profile.

From the 

Parent Profile

 list, select 

http

.

Select the 

Custom

 check box.

From the 

Request Chunking

 list:

Select 

Rechunk

 if you always want the BIG-IP system to send a request to the server as chunked.Select 

Sustain

 if you want the BIG-IP system to decide whether to send a request to the server as chunked or unchunked.

From the 

Response Chunking

 list:

Select 

Unchunk

 if you always want the BIG-IP system to send a response to the client as unchunked. Note that if the content length is undefined because an HTTP payload handler modified the content, the system closes the connection.Select 

Rechunk

 if you always want the BIG-IP system to send a response to the client as chunked.Select 

Sustain

 if you want the BIG-IP system to decide whether to send a response to the client as chunked or unchunked.

Modify the other settings as required for your configuration.

If you want the BIG-IP system to manage server-side traffic differently from client-side traffic, click 

Repeat

 and create another HTTP profile.

Click 

Finished

.

Any custom HTTP profile that you have created now appears on the HTTP profile list screen and is ready for you to assign to a virtual server.

Create a custom HTTP/2 profile

Part of creating an HTTP/2 full-proxy configuration is to create an HTTP/2 profile that you can use for both client-side and server-side application traffic. When you assign the profile to a virtual server, the BIG-IP system applies the settings in the profile to the traffic.

For the most expedient HTTP/2 full-proxy configuration, you can create a single HTTP/2 profile that the BIG-IP system will apply to both client-side and server-side HTTP/2 traffic. Alternatively, if you want the BIG-IP system to manage client-side and server-side traffic in different ways, you can create two separate HTTP/2 profiles and configure the settings differently in each profile.

On the Main tab, click 

Local Traffic

Profiles

Services

HTTP/2

.

Click 

Create

.

Type a 

Name

 for the profile, such as 

my_http2_profile

.

For the 

Parent Profile

 setting, retain the default value 

http2

, or select a different profile.

This setting specifies the profile that you want to use as the parent profile. Your new profile inherits all settings and values from the parent profile that you select.

From the 

Settings

 list, you can select 

Advanced

 to view the advanced settings.

This setting is optional, depending on the settings you want to configure.

On the far-right side of the screen, select the 

Custom

 check box.

In the 

Concurrent Streams Per Connection

 field, retain or change the numeric value.

This setting specifies how many concurrent requests are allowed to be outstanding on a single HTTP/2 connection.

In the 

Connection Idle Timeout

 field, retain or change the numeric value.

This setting specifies the number of seconds that a connection is idle before the connection is eligible for deletion.

From the 

Insert Header

 list, retain the default value of 

Disabled

, or select 

Enabled

.

This setting specifies whether the BIG-IP system should add an HTTP header to the HTTP request to show that the request was received over HTTP/2.

In the 

Insert Header Name

 field, retain the default value or, if the 

Insert Header

 setting is enabled, change the header name.

This setting specifies the name of the header that the BIG-IP system will add to the HTTP request when the 

Insert Header

 is enabled.

From the 

Enforce TLS Requirements

 list, ensure that 

Enabled

. is selected.

Enforcing TLS requirements is required for successful HTTP/2 full-proxy deployment.

Forthe 

Activation Modes

 setting, retain the default value of 

ALPN

 (Application Layer Protocol Negotiation) or select 

Always

.

This setting specifies the condition that will cause the BIG-IP system to handle an incoming connection as an HTTP/2 connection.

In the 

Frame Size

 field, retain the default value of 

2048

, or change the value.

This setting specifies the size, in bytes, of the data frames that HTTP/2 will produce.

In the 

Receive Window

 field, retain the default numeric value of 

32

, or change the numeric value.

This setting specifies, in kilobytes, the size of the receive window for HTTP/2 flow-control.

In the 

Write Size

 field, retain the default numeric value of 

16384

, or change the numeric value.

This setting specifies the size, in bytes, of the SSL records that HTTP/2 will produce.

In the 

Header Table Size

 field, retain the default numeric value of 

4096

, or change the numeric value.

This setting specifies the table size that the BIG-IP system will use for the compression of headers (unused).

If you want the BIG-IP system to manage server-side traffic differently from client-side traffic, click 

Repeat

 and create another HTTP/2 profile.

Click 

Finished

.

Any custom HTTP/2 profile that you have created now appears on the HTTP/2 profile list screen and is ready for you to assign to a virtual server.

Create a basic server pool to process HTTP/2 traffic

You can create a pool of application servers enabled for processing HTTP/2 traffic. After creating the server pool, you must assign the pool to a virtual server.

Each pool member should be an HTTP/2-capable web server.

On the Main tab, click 

Local Traffic

Pools

.

The Pools list screen opens.

Click 

Create

.

The New Pool screen opens.

In the 

Name

 field, type a name for the pool.

Names must begin with a letter, and can contain only letters, numbers, and the underscore (_) character.The pool name is limited to 63 characters.

Type a 

Description

 field, type a description of the pool.

For the 

Health Monitors

 setting, from the 

Available

 box, select a health monitor and move it to the 

Active

 box.

There are no HTTP/2-specific health monitors available on the BIG-IP system.

In the Resources area of the screen, from the 

Load Balancing Method

 list, retain the default, or select a load balancing method.

From the 

Priority Group Activation

 list, retain the default value (

Disabled

) or select 

Less than

 and type a numeric value.

Using the 

New Members

 setting, add each resource that you want to include in the pool:

In the 

Node Name

 field, type a name for the node portion of the pool member.

In the 

Address

 field, type an IP address.

In the 

Service Port

 field, type a port number, or select a service name from the list.

If you enabled priority group activation, then in the 

Priority

 field, type a priority number.

Click 

Add

.

Click 

Finished

.

Create a virtual server to manage HTTP/2 traffic

You must create a virtual server to listen for HTTP/2 traffic, apply profiles and policies, and send the traffic to a pool of application servers that are HTTP/2-enabled.

Do not use the HTTP/2 protocol with NTLM protocols, as they are incompatible.

The BIG-IP does not support Virtual Desktop Infrastructure (VDI) in HTTP/2 environment. Do not attach both HTTP/2 profile and VDI profile together in the virtual server, a virtual server configured with both HTTP/2 profile and VDI profile can result in 

ERR_HTTP2_PROTOCOL_ERROR

.

On the Main tab, click 

Local Traffic

 

Virtual Servers

 

.

The Virtual Server List screen opens.

Click 

Create

.

The New Virtual Server screen opens.

In the 

Name

 field, type a unique name for the virtual server.

For the 

Destination Address/Mask

 setting, confirm that the 

Host

 button is selected, and type the IP address in CIDR format.

The supported format is address/prefix, where the prefix length is in bits. For example, an IPv4 address/prefix is 

10.0.0.1

 or 

10.0.0.0/24

, and an IPv6 address/prefix is 

ffe1::0020/64

 or 

2001:ed8:77b5:2:10:10:100:42/64

. When you use an IPv4 address without specifying a prefix, the BIG-IP system automatically uses a 

/32

 prefix.The IP address you type must be available and not in the loopback network.

In the 

Service Port

 field, type 

443

 or select 

HTTPS

 from the list.

From the 

HTTP Profile (Client)

 list, select a previously-created HTTP profile.

From the 

HTTP Profile (Server)

 list, select 

(Use Client Profile)

.

Alternatively, if you created a separate HTTP profile for managing server-side traffic, select the profile from the list.

For the 

SSL Profile (Client)

 setting, from the 

Available

 list, select 

clientssl-secure

, and move it to the 

Selected

 list.

This profile disables mid-stream SSL renegotiation by default. Disabling SSL renegotiation is a requirement for an HTTP/2 full-proxy deployment.

For the 

SSL Profile (Server)

 setting, from the 

Available

 list, select 

serverssl-secure

, and move the profile to the 

Selected

 list.

This profile disables mid-stream SSL renegotiation by default. Disabling SSL renegotiation is a requirement for an HTTP/2 full-proxy deployment.

From the 

Acceleration

 list, select 

Advanced

.

From the 

HTTP/2 Profile (Client)

 list, select the HTTP/2 profile that you previously created.

From the 

HTTP/2 Profile (Server)

 list, select 

(Use Client Profile)

, or if you created a separate HTTP/2 profile for server-side traffic, select the profile from the list.

For the 

HTTP MRF Router

 setting, select the check box. For example:

 

 

From the 

Default Pool

 list, select a pool that is configured to serve HTTP/2 traffic.

Click 

Finished

.

The HTTP/2 virtual server is now ready to listen for HTTP/2 traffic and send the traffic to the assigned server pool.

View statistics for an HTTP/2 full-proxy deployment

You can view statistics for either client-side or server-side HTTP/2 traffic.

On the Main tab, click 

Statistics

Module Statistics

Local Traffic

From the 

Statstics Type

 list, select 

Virtual Servers

.

By default, this displays the list of virtual servers on the BIG-IP system.

In the Virtual Server column, click the relevant virtual server name.

Along the top of the screen, click the 

Statistics

 menu.

In the Profiles area of the screen, from the 

Select Profile

 list, select an HTTP/2 profile.

After you perform this task, the BIG-IP system displays statistics pertaining to the traffic associated with the HTTP/2 profile you selected.

 

HTH
F5 Design Engineer

(Please rate and mark as solution if this is helpful.)
(F5 DevCentral is a free help community, but it requires time and dedication to help others, a thanks or rating would not hurt or cost anything)