Forum Discussion
Grzegorz_Skrzyp
Nimbostratus
NimbostratusRadius attributes based balncing question
Hi Experts,
This is my first rule - you know what this mean :)
OK - the goal is to have pool member selection based on RADIUS attribute.
I have on my box:
when RULE_INIT {
set static::debug_c...
Grzegorz_SkrzypNimbostratus
NimbostratusMohamed, to be honest - I don't know if this is correct or not. Can I access Radius attributes on other event? Which event is the best for that? Please have a look on my VS configuration below:
ltm virtual VS_RADIUS_auth_1812 {
description "Virtual server for AUTH"
destination 10.49.36.4:radius
ip-protocol udp
mask 255.255.255.255
pool POOL_RADIUS_auth
profiles {
udp { }
}
rules {
F5_EvenOdd
}
source 0.0.0.0/0
source-address-translation {
type automap
}
vlans {
external
}
vlans-enabled
vs-index 7
}
F5 is doing LB just fine (I mean - the load is spread across two Radius servers in Round Robin - configured inside the pool). But this is not my goal - I repeat I need to send all even Calling-Station-ID to one server and odd Calling-Station-ID to another. Is there any other possibility to achieve this?
