Forum Discussion
smp_86112
Cirrostratus
CirrostratusProper Trunk/Etherchannel LACP Configuration
I'm working with LACP and trunks for the first time on a 10.1.0 LTM box. I have read the TMOS Config Guide, and there is some ambiguity around the proper way to configure LACP between the trunk and th...
smp_86112Cirrostratus
CirrostratusThanks for asking. It seems to be working from my perspective. By that, I mean it is behaving how I would expect. We can shut one port in the channel without disruption, and shutting down both ports triggers VLAN Failsafe. This is the running config of the channel and both ports - we are not using tagged interfaces on the LTM side:
interface Port-channel10
switchport access vlan 100
switchport mode access
end
interface FastEthernet0/21
switchport access vlan 100
switchport mode access
speed 100
duplex full
udld port
channel-group 10 mode active
end
interface FastEthernet0/23
switchport access vlan 100
switchport mode access
speed 100
duplex full
udld port
channel-group 10 mode active
end
