Forum Discussion
Ken_Meade_51669
Nimbostratus
Nimbostratuspool-member control question
I'm sure this is simple but I can't find it for the life of me...
1 pool and 2 members, round-robin and Priority groups used .... pool-member1=2 : pool-member2=1, priority group activation = less-then 1.
If pool-member1 goes down this if fine traffic goes to pool-member2, when pool-member1 returns to service I want to keep the traffic pointing to pool-member2 and not return to pool-member1...is this possible via GUI config..?
9.4.7 build 320.1 final
Many thanks for responses
- The_BhattmanDo you want current traffic to point to Pool_member2 and new traffic to go to Pool_member1 when pool_member1 comes up?
CB - JRahm
Admin
It sounds like you want single node persistence:
http://devcentral.f5.com/Wiki/default.aspx/iRules/SingleNodePersistence.html Click here 
Ken_Meade_51669i basically don't want the traffic to start using pool-member1 when it becomes available again, i.e.
pool-member1 active
pool-member1 down ---> pool-member2 active
pool-member1 up ---> pool-member2 active (no traffic to pool-member1)
pool-member2 down ---> pool-member1 active
pool-member2 up ----> pool-member1 active
pool-member1 down ---> pool-member2 active
pool-member1 up ----> pool-member2 active
etc...- Ken_Meade_51669single node persistence sounds like what I'm after thanks I'll try to implement that today and see how it goes.
