oneconnect (Source Prefix Lengt = None)

Hi rschwarz79​ 

Source Prefix Length : Specifies the prefix length that you want to use as the source mask. The length must be the number of set bits in a bitmask, specifically, between 0 and 128 for IPv6, or between 0 and 32 for IPv4. The default is None. The system applies the value of this setting to the server-side source address to determine its eligibility for reuse. A mask of 0 causes the system to share reused connections across all source addresses. A mask of /32 (that is, all 1 values in binary) causes the system to share only those reused connections originating from the same source address. If SNAT is configured, the BIG-IP system performs SNAT address translation on the source IP address, and then applies the OneConnect source mask to the translated SNAT IP address to determine whether it is eligible to reuse an existing idle connection.

• "None" = 0 (all zeros mask) for OneConnect Source Prefix Length.
• This enables maximum connection reuse across all clients.
• It does not disable OneConnect or connection reuse.