Forum Discussion

Scott_C_16492's avatar
Scott_C_16492
Icon for Nimbostratus rankNimbostratus
Feb 15, 2011

Network Virtual Servers

Hi I'm trying to create a single virtual for a range of IPs pointing to the same pool.     All added ok via the gui, here's the config looks like:   virtual address 94.136.40.224 { ...
config
design
hc_andy_35682's avatar
hc_andy_35682
Icon for Nimbostratus rankNimbostratus
Feb 15, 2011
What Hamish says is exactly right on...

 

 

 

You will need to create a self IP and floating IP on the LTM for your HTTP/inside vlan. This means you'll need 3 IP's per inside vlan - one for the active unit, one for the standby unit and one floating IP across both units (provided you have a HA set up).

 

 

The real machines (nodes) in the http.linweb.pool will then have their default gateway changed to that of the floating IP. This is very important so that the return traffic will go back via the LTM so in effect it makes the virtual server act very much like a "router".

 

 

HTH

 

 

Andy