Forum Discussion

Rakeshvela_3309's avatar
Rakeshvela_3309
Icon for Nimbostratus rankNimbostratus
Aug 28, 2017

NAT in LTM

Hi All,   Say there is a Public IP Mapped to Internal IP (say Public IP owned by us)1.1.1.1 ---> 10.1.1.1(As a member). When request from outside hits the VIP 1.1.1.1, the request is sent to desti...
  • eben_259100's avatar
    Aug 28, 2017

    Hi Rakeshvela

     

    From what you have described, 1.1.1.1 is the Post-NAT IP address for F5 Virtual Server IP address 10.1.1.1 right?

     

    For the question you asked, is 10.1.1.1 same as the self-ip for outbound connections? if yes, then outbound traffic will be initiated from this IP (10.1.1.1). if not, the self-ip for your outbound vlan will be used. Outbound connections to resources where F5 does not have a leg(vlan + self-ip) will be forwarded to your default gateway or next-hop ip address if static routes were set on the box. You will need to add this IP address to your internet accessible subnets in your NAT statement.

     

    HTH Regards Eben.