Forum Discussion
NimbostratusMeasure L4 Throughput
We have created one VIP on HTTP and back end threes servers are also on port 80. We are using LTM for Object storing servers where large file is uploaded through VIP. Two interface (inside & outside) of LTM 2000s are connected to switch on 10G and all servers are connected on 10G on same same switch. when customer is doing some testing using some load runner. On the switch interface where LTM is connected, can not exceed more than 5 Gbps Throuput. is it because LTM 2000 support 5 Gbps throughput?
Please explain how to measure L4/L7 throughput of LTM2000s with 10G interface ?
2 Replies
Vijay_ECirrus
2000 should support 10Gbps. You can measure using SNMP, if you want. You can also check out the graphs on the F5 for throughput measurement.
- boneyard
MVP
do you mean 10Gbit interfaces or throughput Odaah? because the data sheet does mention:
Throughput: 5 Gbps L4/L7https://www.f5.com/pdf/products/big-ip-platforms-datasheet.pdf
so that can be very well the case Kunal.
