Manual Configuration (Advanced)?

Zeus,

 

This means that your virtual server has either a custom local traffic policy (also know as layer 7 or L7 policy) configured or that a L7 policy was manually assigned to the virtual server. It is the L7 policy which directs http request to the ASM security policy. With ASM if you assign a security policy directly to the VS first then bigip creates a an "auto_L7...." local traffic policy and assigns it to the VS also. With this configuration you can manage the security policy VS assignment directly from Security>Policies.

 

If you assign an L7 policy to the VS (or customize the default rule in the L7 policy) before assigning a security policy then you will see the message "manual configuration" under Security>Policies and be unable to change security policies there. You must modify the L7 policy to change the security policy that is used.

 

To see which L7 policy is assigned to the VS go to VS properties>Resources tab>Policies list.

 

To modify the L7 policy Local Traffic>Policies>Policy List.

 

What is it that you need to do?