Forum Discussion
InquisitiveMai
Cirrostratus
CirrostratusLTM policy to route traffic to different pools
I have requirement of sending traffic to different pools based on port information . I understand we can do this with iRukes. But I would like to try LTM policies. What rules should we give? Would on...
Hi InquisitiveMai ,
you can configure like this LTM Policy in below solution check it :
https://community.f5.com/t5/technical-forum/multiple-ports-in-a-single-health-monitor-and-ltm-policy-to-send/m-p/303876#M263047
But specify your Port exactly in rule conditions.
> you do not need the urls information , you can loadbalance based on port numbers.
Ty
neeeewbie
MVP
MVPHi
you can make many different virtual server(same virtual address) based on different virtual server port
if you want to external network traffic divide as port
you just make performanceL4 type virtual server and then binding external vlan
and set up the pool
if you want to just forwarding this traffic, you just turn off address,port translate option
and then turn off icmp echo, arp reply option at virtual address tap
thank you