Forum Discussion

JCMATTOS_41723's avatar
JCMATTOS_41723
Icon for Nimbostratus rankNimbostratus
Feb 12, 2009

Link Controller Routing Stuck?

We have dual 1500 Link Controllers 9.4.5 HF2 and we are doing simple gateway pool loadbalancing to 2 ISP's. We noticed that when one of our circuits go down it shows the pool member inactive but it still retains routing information to use the inactive circuit. For whatever reason no matter how long the circuit is down for it still continues to route over the inactive circuit. To test our theory we even created a static route to point to the other circuit but still it uses the inactive circuit. Please Help!

 

 

Destination 172.25.2.1

 

 

[root@F5-MPLS-LC-1:Active] config b route show

 

ROUTE 172.25.0.0/16

 

| POOL Gateway_Ratio_Poulsbo static

 

ROUTE 172.25.2.1

 

| GATEWAY 172.24.74.2 static
config
design
  • Javier_Checa_41's avatar
    Javier_Checa_41
    Icon for Nimbostratus rankNimbostratus
    Feb 25, 2009
    Hello JC,

     

     

    [root@F5-MPLS-LC-1:Active] config b route show

     

    ROUTE 172.25.0.0/16

     

    | POOL Gateway_Ratio_Poulsbo static

     

     

    I think the routing is working fine. The route points to the pool of the gateways, not to the gateway that is disconnected.

     

     

    Javier.