Forum Discussion

eswoosh_263519's avatar
eswoosh_263519
Icon for Nimbostratus rankNimbostratus
May 23, 2016

LB Traffic and OAM traffic isolation

IF TMM switch route is not available traffic is going through OAM route. Is it possible to restrict traffic from OAM?  
application delivery
TMOS
eswoosh_263519's avatar
eswoosh_263519
Icon for Nimbostratus rankNimbostratus
May 23, 2016
Hi, We have the following route table (there is no static route defined) Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.1.0 0.0.0.0 255.255.255.252 U 0 0 0 HA 192.168.41.0 0.0.0.0 255.255.255.248 U 0 0 0 internal xxx.xxx.xxx.xxx 0.0.0.0 255.255.255.248 U 0 0 0 external xxx.xx.xx.xxx 0.0.0.0 255.255.255.240 U 0 0 0 mgmt xxx.xx.xx.xxx 0.0.0.0 255.255.255.240 U 9 0 0 mgmt 127.1.1.0 0.0.0.0 255.255.255.0 U 0 0 0 tmm0 127.3.0.0 0.0.0.0 255.255.255.0 U 0 0 0 mgmt_bp 127.2.0.0 0.0.0.0 255.255.255.0 U 0 0 0 mgmt.1 127.7.0.0 127.1.1.254 255.255.0.0 UG 0 0 0 tmm0 0.0.0.0 172.17.44.xxx 0.0.0.0 UG 9 0 0 mgmt If there is no route in TMM, traffic is going via mgmt interface. Can we restrict this or is this default behavior?