iRule to choose SNAT pool based on egress non-floating self-ip

Hi,

I have posted an issue regarding a SNAT problem here:

https://devcentral.f5.com/community...628/asg/52

I thought I would post specifically in the iRule section to see if someone can provide some advice as per subject, iRule to choose SNAT pool based on egress non-floating self-ip.

This is an Active/Standby unit with no floating IPs on the egress, so I need to ensure that whatever device is active, the appropriate non-floating self-ip egress IP will be used.

Is this possible? I am thinking of a way to query the presence of a self-ip within an iRule...

Thanks

James