iRule Source IP Re-direct to a different pool

Create an IRule data group list els-es-clinicalpharmacology-ip-HCA and place the ips as networks in it.

Then create an irule as follows, replacing HCP_pool and Orginial_pool with your specific pool names.

when CLIENT_ACCEPTED { if { [class match [IP::remote_addr] equals els-es-clinicalpharmacology-ip-HCA] } { pool HCA_pool } else { pool Original_pool } }

Brian thank so much. below is what I think you were saying but how would it look using a whole IP range. And how would port 443 be recognized

when CLIENT_ACCEPTED { if { [class match [IP::165.214.11.0/24] equals els-es-clinicalpharmacology-ip-HCA] } { pool els-es-clinicalpharmacology-ip-HCA-http-80 } else { pool els-es-clinicalpharmacology-ip-http-80 } }

I also have 198.185.18.0/24 Did I specify the subnet mask correctly?

In the Irule above remote_addr is not something you would change. It needs to stay in the Irule just like it reads. You add the 4 networks into the Irule data group list, not the irule itself.

The port will be recognized based on what the virtual server and pools members are configured for. There is no configuration in the Irule for the port.

I'll post some screenshots of where I've used this if you want.