Forum Discussion
NimbostratusiRule for logging client version
NimbostratusHi,
Am i following the right track here, after enabling the iRule on the relevant VS.
I am running the below command, and get following output. Which doesnt look to be providing the output ive hoped. Am i looking for the stats in the wrong place maybe?
show ltm pool /Common/websense-v10000
Ltm::Pool: websense-v10000
Status Availability : available State : enabled Reason : The pool is available Monitor : min 1 of /Common/gmail_test /Common/http Minimum Active Members : 0 Current Active Members : 1 Total Requests : 33938 Current Sessions : 85
Traffic ServerSide Bits In 590.0M Bits Out 4.5G Packets In 374.3K Packets Out 567.1K Current Connections 5 Maximum Connections 60 Total Connections 19.9K
Connection Queue Pool Pool and members Number of connections queued now 0 0 Number of connections serviced 0 0 Queue head entry age (ms) 0 0 Maximum queue entry age ever (ms) 0 0 Maximum queue entry age recently (ms) 0 0 Average queue entry age (ms) 0 0
- Eric_St__John
Employee
My apologies, there was a slight error in the iRule above, I missed the 'counter' in the ISTATS::incr command. Please try the updated iRule above. Once that is corrected, you should see something similar to below added to the output of 'show ltm pool /Common/websense-v10000' User-defined Value 192.168.2.116 5 Eric - nitassthe istats should be added to output of show virtual (i.e. show ltm virtual ...).
