Forum Discussion
Samir_Jha_52506
Noctilucent
You can achieve this by setting ratio to Pool Member(minimum available as per requirement)
Pool
Pool_mem1 : VLAN 1 --> 5 Pool_mem2 : VLAn2 --> 5 POOL_mem3 : VLAN 1 --> 2 POOL_mem4 : VLAn2 -->2
Like this
SuhailNedaria_2
May 31, 2016Nimbostratus
Hi Samir
Pool 1 :- Vlan 1 -- 2 Member configure in Active Passive
Pool 1 :- Vlan 2 -- 2 Member configure in Active Passive
Requirement :-
a) If pool 1 active server fails then traffic should go to passive server:- configure the same with help of priority.
b) At the same time pool 2 primary server should also be failed forcefully and traffic should move to secondary server:- Issue open. Need solution for this.
Eventually customer is looking for if any pool primary server fails then traffic should move to secondary server in each pool and vice versa.
Hope i have cleared your question.