Forum Discussion

amiranti1982_54's avatar
amiranti1982_54
Icon for Nimbostratus rankNimbostratus
Dec 06, 2011

I have a F5-LTM sandwiched between ASAs and a CheckPoint firewall... Need route help!

I am trying to set up a complicated system of firewalls stacked on one another inside of a DMZ.     I have configured a CheckPoint as my outside (outside to the DMZ) firewall facing the public...
config
design
amiranti1982_54's avatar
amiranti1982_54
Icon for Nimbostratus rankNimbostratus
Dec 06, 2011
From the switch I can connect directly with the CheckPoint through the F5-LTM. I can connect directly to the F5-LTM. I can connect directly to the ASAs. I need a route from the F5-LTM back to the ASAs. The ASA information is leaving out of the outside interface, traversing the switch, getting to the F5 and there is no return route for information back to the ASAs.

 

 

I have made mutiple configuration and route changes to both the ASA and the F5-LTM, as I too believed the ASA was the root problem.

 

 

However, during my testing, I have connected the ASA directly to the F5, took the switch out of the equation, and still suffered the same issue. No matter how I tried to configure the routes on the F5-LTM, I was unable to get the ASA to communicate directly with the F5-LTM.
Related Content