I have a F5 2400 with b2100 Units. I like to know how I can do the follwing need to change the console on slot 3 to slot 2

are you connecting to slot3 console? if yes, doesn't esc( work?

e.g.

[root@VIP2400-R72-S29:/S1-green-P:Active] config 

Active console               : slot 1
Physically connected console : slot 1

AOM Command Menu:
B --- Set console baud rate
C --- Capture blade console
I --- Display platform information
P --- Power on/off blade
R --- Reset blade
Q --- Quit menu and return to console

Enter Command: c

Blade to capture console output from (1-4)? 2

Connecting to blade in slot 2...success.


Active console               : slot 2
Physically connected console : slot 1

AOM Command Menu:
B --- Set console baud rate
C --- Capture blade console
I --- Display platform information
P --- Power on/off blade
R --- Reset blade
Q --- Quit menu and return to console

Enter Command: q


BIG-IP 10.2.2 Build 763.3
Kernel 2.6.18-164.11.1.el5.1.0.f5app on an x86_64
VIP2400-R72-S29.lab.ss.f5net.com login: