Forum Discussion

Muhammad_Irfan1's avatar
Muhammad_Irfan1
Icon for Cirrus rankCirrus
Dec 16, 2014

https Monitor

F5 LTM is load balancing among 6 webservers. Application servers are behind webserver. I have configured a monitor of tcp halfopen for port 4443 which is the port of webserver.   Now I am facing ...
Sheigh_65772's avatar
Sheigh_65772
Icon for Cirrus rankCirrus
Dec 16, 2014

You can have both the tcp and http monitor. Also for the timeout the recommendation is (3*interval)+1.

 

For example if you expect the process to take 40 seconds you could put your interval at 40 and your timeout at 121. This will allow for 3 bad polls before the member is marked down. If you want it to allow for only two bad polls by the monitor you could set your timeout to 81.

 

https://devcentral.f5.com/questions/ltm-monitor-requiring-multiple-failures-before-marking-pool-member-down

 

  • Muhammad_Irfan1's avatar
    Muhammad_Irfan1
    Icon for Cirrus rankCirrus
    Dec 19, 2014
    We have 6 webservers, link is https://10.50.169.26:4443/ecommunications_enu/start.swe. Just ip changes for each webserver. As i only want to check if webserver returns application login page then its up otherwise down if does not return login page. I know which cipher string to put. Using HTTP1.1. can you make a monitor for this please