NimbostratusHi! I have a doubt regarding in which place should I look for the Verbose debug when I enable a debug specifically for a monitor, I have been looking around but everytime I see they only say about full debug not for a specific Health Monitor, do anyone of you knows were should I look for this debug? is it /var/log/ltm ??? version is 11
Thank you!
* Getting Started on DevCentral
* Community Guidelines
* Community Terms of Use / EULA
* Community Ranking Explained
* Community Resources
* Contact the DevCentral Team
* Update MFA on account.f5.com
* Podcasts
* Social Channels
* Video Streaming
![\"F5](\"https://www.f5.com/content/dam/f5/f5-logo.svg\"){kind=logo}
©2024 F5, Inc. All rights reserved. \n
We have an iRule that handles client certificate authentication. I've posted other things about it before. It handles users either providing a valid cert that is in our LDAP tree, providing a valid cert that is not in our LDAP tree, and not providing a cert at all. The client SSL profile is set to \"Request\" for client certificates.\n
The rule was working perfectly...until we needed to add another CA to the bundle of advertised client certificates. After doing this, we ran the \"b load\" command from the Linux command line to reload all settings to make it take effect. Now our rule breaks when the user provides a valid cert that is not in LDAP. Specifically, in the HTTP_RESPONSE, we check a variable to see if AUTH_FAILURE has occurred, and if so, redirect to another page. Ever since we ran \"b load\", it seems as though two simultaneous requests come through the whole rule, and these two requests result in this error:\n
Aug 2 22:22:37 tmm tmm[16587]: 01220001:3: TCL error: Rule auth_responses - Operation not supported. Multiple redirect/respond invocations not allowed (line 1) invoked from within \"HTTP::redirect https://idelb/BIGIPClientCert/Cli\n
entCert.aspx\"\n
In fact, even using a valid cert that is in the LDAP tree results in multiple requests.\n
I know that Internet Explorer has this behavior of sending multiple requests, but before, the behavior was that the requests seemed to occur consecutively (this was proven by us using variables to do certain behavior based on whether an authentication attempt already occurred). Now these requests seem to happen simultaneously, as can be seen below, so variable tracking has become useless...\n
Aug 2 22:22:34 tmm tmm[16587]: Rule auth_responses : initing auth_tried\n
Aug 2 22:22:34 tmm tmm[16587]: Rule auth_responses : initing auth_tried\n
Aug 2 22:22:36 tmm tmm[16587]: Rule auth_responses : initing auth_tried\n
Aug 2 22:22:36 tmm tmm[16587]: Rule auth_responses : initing auth_tried\n
Aug 2 22:22:37 tmm tmm[16587]: Rule auth_responses : in the client ssl handshake\n
Aug 2 22:22:37 tmm tmm[16587]: Rule auth_responses : initing auth_tried\n
Aug 2 22:22:37 tmm tmm[16587]: Rule auth_responses : initing auth_tried\n
Aug 2 22:22:37 tmm tmm[16587]: Rule auth_responses : in the client ssl handshake\n
Aug 2 22:22:37 tmm tmm[16587]: Rule auth_responses : Setting to profile type_cert_ldap\n
Aug 2 22:22:37 bigiptst tamd: 010b0232:4: pam_authenticate: 6\n
Aug 2 22:22:37 bigiptst tamd: 010b0235:4: AUTH: Permission denied\n
Aug 2 22:22:37 tmm tmm[16587]: Rule auth_responses : auth_failure\n
Aug 2 22:22:37 tmm tmm[16587]: Rule auth_responses : auth_failure - reject, auth_code is 1\n
Aug 2 22:22:37 tmm tmm[16587]: Rule auth_responses : auth_failure\n
Aug 2 22:22:37 tmm tmm[16587]: Rule auth_responses : auth_failure - reject, auth_code is 1\n
Aug 2 22:22:37 tmm tmm[16587]: Rule auth_responses : in http response, auth_code is 1\n
Aug 2 22:22:37 tmm tmm[16587]: Rule auth_responses : in http response, auth_code is 1\n
Aug 2 22:22:37 tmm tmm[16587]: 01220001:3: TCL error: Rule auth_responses - Operation not supported. Multipl\n
e redirect/respond invocations not allowed (line 1) invoked from within \"HTTP::redirect https://idelb/BIGIPClientCert/Cli\n
entCert.aspx\"\n
Any advice? Because it just seems to have happened out of the blue. We had not changed any other configurations before running the \"b load\" command. If you'd like any other supporting info, please let me know. Our entire iRule can be seen below. Thanks.
\nwhen CLIENT_ACCEPTED {\n log local0. \"initing auth_tried\"\n set auth_tried 0\n set auth_code 0\n}\nwhen CLIENTSSL_HANDSHAKE {\n log local0. \"in the client ssl handshake\"\n}\nwhen HTTP_REQUEST\n{\n set id [SSL::sessionid]\n set the_cert [session lookup ssl $id]\n if {[HTTP::uri] contains \"/BIGIPClientCert/ClientCert.aspx\"}\n { \n set auth_code 0\n HTTP::header replace SSLClientCert [b64encode $the_cert]\n log local0. \"Sending to new pool\"\n log local0. [HTTP::header SSLClientCert]\n pool owgwtis3_pool\n } else {\n \n if {$the_cert != \"\" && $auth_tried == 0}\n {\n set auth_tried 1\n set issuer [X509::issuer $the_cert] \n \n if {$issuer contains \"Lockheed Martin\"}\n { \n log local0. \"Setting to profile type_cert_ldap\"\n set myprofilename \"type_cert_ldap\"\n } elseif {$issuer contains \"VeriSign\"} {\n log local0. \"Setting to profile type_cert_ldap_392\"\n set myprofilename \"type_cert_ldap_392\"\n \n }\n set tmm_auth_ssl_cc_ldap_sid [AUTH::start pam $myprofilename] \n AUTH::cert_credential $tmm_auth_ssl_cc_ldap_sid $the_cert \n AUTH::authenticate $tmm_auth_ssl_cc_ldap_sid \n HTTP::collect\n }\n elseif {$the_cert == \"\" && $auth_tried == 0} {\n if {[matchclass [HTTP::uri] starts_with $::no_cert_required]} {\n log local0. \"no cert needed for this URI\"\n HTTP::release\n }\n else {\n log local0. \"cert required but not provided\"\n HTTP::uri \"/Errors/NoCert.html\"\n }\n }\n }\n}\nwhen AUTH_SUCCESS\n{\n log local0. \"auth_success\" \n set auth_code 0\n if {$tmm_auth_ssl_cc_ldap_sid eq [AUTH::last_event_session_id]}\n { \n HTTP::release \n } \n}\nwhen AUTH_FAILURE\n{\n log local0. \"auth_failure\" \n set auth_code 1\n if {$tmm_auth_ssl_cc_ldap_sid eq [AUTH::last_event_session_id]}\n { \n log local0. \"auth_failure - reject, auth_code is $auth_code\"\n HTTP::release \n }\n}\nwhen AUTH_WANTCREDENTIAL\n{\n log local0. \"auth_wantcredential\" \n if {$tmm_auth_ssl_cc_ldap_sid eq [AUTH::last_event_session_id]}\n { \n reject \n }\n}\nwhen AUTH_ERROR\n{ \n log local0. \"auth_error\" \n if {$tmm_auth_ssl_cc_ldap_sid eq [AUTH::last_event_session_id]}\n { \n reject \n } \n}\nwhen HTTP_RESPONSE {\n log local0. \"in http response, auth_code is $auth_code\" \n if {$auth_code eq 1} { \n this page only exists onowgwipo1 \n set auth_code 0\n HTTP::redirect https://idelb/BIGIPClientCert/ClientCert.aspx\n }\n}\n
We have an iRule that handles client certificate authentication. I've posted other things about it before. It handles users either providing a valid cert that is in our LDAP tree, providing a valid cert that is not in our LDAP tree, and not providing a cert at all. The client SSL profile is set to \"Request\" for client certificates.\n
The rule was working perfectly...until we needed to add another CA to the bundle of advertised client certificates. After doing this, we ran the \"b load\" command from the Linux command line to reload all settings to make it take effect. Now our rule breaks when the user provides a valid cert that is not in LDAP. Specifically, in the HTTP_RESPONSE, we check a variable to see if AUTH_FAILURE has occurred, and if so, redirect to another page. Ever since we ran \"b load\", it seems as though two simultaneous requests come through the whole rule, and these two requests result in this error:\n
Aug 2 22:22:37 tmm tmm[16587]: 01220001:3: TCL error: Rule auth_responses - Operation not supported. Multiple redirect/respond invocations not allowed (line 1) invoked from within \"HTTP::redirect https://idelb/BIGIPClientCert/Cli\n
entCert.aspx\"\n
In fact, even using a valid cert that is in the LDAP tree results in multiple requests.\n
I know that Internet Explorer has this behavior of sending multiple requests, but before, the behavior was that the requests seemed to occur consecutively (this was proven by us using variables to do certain behavior based on whether an authentication attempt already occurred). Now these requests seem to happen simultaneously, as can be seen below, so variable tracking has become useless...\n
Aug 2 22:22:34 tmm tmm[16587]: Rule auth_responses : initing auth_tried\n
Aug 2 22:22:34 tmm tmm[16587]: Rule auth_responses : initing auth_tried\n
Aug 2 22:22:36 tmm tmm[16587]: Rule auth_responses : initing auth_tried\n
Aug 2 22:22:36 tmm tmm[16587]: Rule auth_responses : initing auth_tried\n
Aug 2 22:22:37 tmm tmm[16587]: Rule auth_responses : in the client ssl handshake\n
Aug 2 22:22:37 tmm tmm[16587]: Rule auth_responses : initing auth_tried\n
Aug 2 22:22:37 tmm tmm[16587]: Rule auth_responses : initing auth_tried\n
Aug 2 22:22:37 tmm tmm[16587]: Rule auth_responses : in the client ssl handshake\n
Aug 2 22:22:37 tmm tmm[16587]: Rule auth_responses : Setting to profile type_cert_ldap\n
Aug 2 22:22:37 bigiptst tamd: 010b0232:4: pam_authenticate: 6\n
Aug 2 22:22:37 bigiptst tamd: 010b0235:4: AUTH: Permission denied\n
Aug 2 22:22:37 tmm tmm[16587]: Rule auth_responses : auth_failure\n
Aug 2 22:22:37 tmm tmm[16587]: Rule auth_responses : auth_failure - reject, auth_code is 1\n
Aug 2 22:22:37 tmm tmm[16587]: Rule auth_responses : auth_failure\n
Aug 2 22:22:37 tmm tmm[16587]: Rule auth_responses : auth_failure - reject, auth_code is 1\n
Aug 2 22:22:37 tmm tmm[16587]: Rule auth_responses : in http response, auth_code is 1\n
Aug 2 22:22:37 tmm tmm[16587]: Rule auth_responses : in http response, auth_code is 1\n
Aug 2 22:22:37 tmm tmm[16587]: 01220001:3: TCL error: Rule auth_responses - Operation not supported. Multipl\n
e redirect/respond invocations not allowed (line 1) invoked from within \"HTTP::redirect https://idelb/BIGIPClientCert/Cli\n
entCert.aspx\"\n
Any advice? Because it just seems to have happened out of the blue. We had not changed any other configurations before running the \"b load\" command. If you'd like any other supporting info, please let me know. Our entire iRule can be seen below. Thanks.The F5 Certification is excited to announce that all five of the NEW F5 Certified BIG-IP Administrator Certification (F5 CAB) exams are now live and available to schedule via the new Education Services Portal.
","postTime":"2025-04-23T11:16:38.997-07:00","lastPublishTime":"2025-04-25T10:49:39.663-07:00","images":{"__typename":"AssociatedImageConnection","edges":[{"__typename":"AssociatedImageEdge","cursor":"MjUuNHwyLjF8b3wyNXxfTlZffDE","node":{"__ref":"AssociatedImage:{\"url\":\"https://community.f5.com/t5/s/zihoc95639/images/bS0zNDA5MTEtOEo4VzQw?revision=3\"}"}}],"totalCount":1,"pageInfo":{"__typename":"PageInfo","hasNextPage":false,"endCursor":null,"hasPreviousPage":false,"startCursor":null}},"tags":{"__typename":"TagConnection","pageInfo":{"__typename":"PageInfo","hasNextPage":true,"endCursor":"MjUuNHwyLjF8b3w1fF9OVl98NQ","hasPreviousPage":false,"startCursor":null},"edges":[{"__typename":"TagEdge","cursor":"MjUuNHwyLjF8b3w1fF9OVl98MQ","node":{"__typename":"Tag","id":"tag:101","text":"101","time":"2022-01-24T02:30:16.258-08:00","lastActivityTime":null,"messagesCount":null,"followersCount":null}},{"__typename":"TagEdge","cursor":"MjUuNHwyLjF8b3w1fF9OVl98Mg","node":{"__typename":"Tag","id":"tag:201","text":"201","time":"2022-01-24T02:33:36.625-08:00","lastActivityTime":null,"messagesCount":null,"followersCount":null}},{"__typename":"TagEdge","cursor":"MjUuNHwyLjF8b3w1fF9OVl98Mw","node":{"__typename":"Tag","id":"tag:administrator","text":"administrator","time":"2024-04-19T00:36:27.334-07:00","lastActivityTime":null,"messagesCount":null,"followersCount":null}},{"__typename":"TagEdge","cursor":"MjUuNHwyLjF8b3w1fF9OVl98NA","node":{"__typename":"Tag","id":"tag:announcement","text":"announcement","time":"2021-12-19T07:45:21.000-08:00","lastActivityTime":null,"messagesCount":null,"followersCount":null}},{"__typename":"TagEdge","cursor":"MjUuNHwyLjF8b3w1fF9OVl98NQ","node":{"__typename":"Tag","id":"tag:BIG-IP","text":"BIG-IP","time":"2022-01-24T02:29:45.031-08:00","lastActivityTime":null,"messagesCount":null,"followersCount":null}}]},"timeToRead":3,"introduction":"","metrics":{"__typename":"MessageMetrics","views":1147},"placeholder":false,"showMoveIndicator":false,"originalMessageForPlaceholder":null,"videos":{"__typename":"VideoConnection","edges":[],"totalCount":0,"pageInfo":{"__typename":"PageInfo","hasNextPage":false,"endCursor":null,"hasPreviousPage":false,"startCursor":null}}},"Conversation:conversation:340911":{"__typename":"Conversation","id":"conversation:340911","solved":false,"topic":{"__ref":"TkbTopicMessage:message:340911"},"lastPostingActivityTime":"2025-04-28T08:13:10.869-07:00","lastPostTime":"2025-04-28T08:13:10.869-07:00","isSubscribed":false},"ModerationData:moderation_data:340911":{"__typename":"ModerationData","id":"moderation_data:340911","status":"APPROVED","rejectReason":null},"AssociatedImage:{\"url\":\"https://community.f5.com/t5/s/zihoc95639/images/bS0zNDA5MTEtOEo4VzQw?revision=3\"}":{"__typename":"AssociatedImage","url":"https://community.f5.com/t5/s/zihoc95639/images/bS0zNDA5MTEtOEo4VzQw?revision=3","title":"clipboard_image-1-1745603317979.png","associationType":"TEASER","width":610,"height":343,"altText":""},"User:user:7":{"__typename":"User","id":"user:7","login":"LiefZimmerman"},"ModerationData:moderation_data:258889":{"__typename":"ModerationData","id":"moderation_data:258889","status":"APPROVED","rejectReason":null,"isReportedAbuse":false,"rejectUser":null,"rejectTime":null,"rejectActorType":null},"ForumReplyMessage:message:258889":{"__typename":"ForumReplyMessage","author":{"__ref":"User:user:46610"},"id":"message:258889","entityType":"FORUM_REPLY","eventPath":"category:Forums/community:zihoc95639board:TechnicalForum/message:258888/message:258889","revisionNum":1,"uid":258889,"depth":1,"hasGivenKudo":false,"subscribed":false,"board":{"__ref":"Forum:board:TechnicalForum"},"parent":{"__ref":"ForumTopicMessage:message:258888"},"conversation":{"__ref":"Conversation:conversation:258888"},"subject":"Re: HTTP_RESPONSE problems with multiple requests","moderationData":{"__ref":"ModerationData:moderation_data:258889"},"body":"Ok - I think you can almost disregard my post...
\n
We rebooted the device and the behavior has gone back to normal. Before the reboot, we did notice that many of the caches were at the maximum allocation. Could this be the cause of the strange behaviors I described? Is there a way to purge caches without a device reboot? It doesn't bode well for a production environment.
\n
Thanks.","body@stripHtml({\"removeProcessingText\":false,\"removeSpoilerMarkup\":false,\"removeTocMarkup\":false,\"truncateLength\":200})@stringLength":"213","kudosSumWeight":0,"repliesCount":0,"postTime":"2005-08-03T06:00:55.000-07:00","lastPublishTime":"2005-08-03T06:00:55.000-07:00","metrics":{"__typename":"MessageMetrics","views":190},"visibilityScope":"PUBLIC","placeholder":false,"showMoveIndicator":false,"originalMessageForPlaceholder":null,"isEscalated":null,"solution":false,"replies":{"__typename":"MessageConnection","pageInfo":{"__typename":"PageInfo","hasNextPage":false,"endCursor":null,"hasPreviousPage":false,"startCursor":null},"edges":[]},"customFields":[],"attachments":{"__typename":"AttachmentConnection","edges":[],"pageInfo":{"__typename":"PageInfo","hasNextPage":false,"endCursor":null,"hasPreviousPage":false,"startCursor":null}}},"Rank:rank:47":{"__typename":"Rank","id":"rank:47","position":4,"name":"Historic F5 Account","color":"949494","icon":null,"rankStyle":"OUTLINE"},"User:user:122604":{"__typename":"User","id":"user:122604","uid":122604,"login":"unRuleY_95363","biography":null,"registrationData":{"__typename":"RegistrationData","status":null,"registrationTime":"2004-09-25T01:00:00.000-07:00"},"deleted":false,"email":"","avatar":{"__typename":"UserAvatar","url":"https://community.f5.com/t5/s/zihoc95639/m_assets/avatars/default/avatar-5.svg?time=0"},"rank":{"__ref":"Rank:rank:47"},"entityType":"USER","eventPath":"community:zihoc95639/user:122604"},"ModerationData:moderation_data:258890":{"__typename":"ModerationData","id":"moderation_data:258890","status":"APPROVED","rejectReason":null,"isReportedAbuse":false,"rejectUser":null,"rejectTime":null,"rejectActorType":null},"ForumReplyMessage:message:258890":{"__typename":"ForumReplyMessage","author":{"__ref":"User:user:122604"},"id":"message:258890","entityType":"FORUM_REPLY","eventPath":"category:Forums/community:zihoc95639board:TechnicalForum/message:258888/message:258890","revisionNum":1,"uid":258890,"depth":1,"hasGivenKudo":false,"subscribed":false,"board":{"__ref":"Forum:board:TechnicalForum"},"parent":{"__ref":"ForumTopicMessage:message:258888"},"conversation":{"__ref":"Conversation:conversation:258888"},"subject":"Re: HTTP_RESPONSE problems with multiple requests","moderationData":{"__ref":"ModerationData:moderation_data:258890"},"body":"One thing that might be helpful is to log the AUTH::last_event_session_id and possibly the client IP and source port in your log messages as it will help correlate which logs are with which connections.
","body@stripHtml({\"removeProcessingText\":false,\"removeSpoilerMarkup\":false,\"removeTocMarkup\":false,\"truncateLength\":200})@stringLength":"203","kudosSumWeight":0,"repliesCount":0,"postTime":"2005-08-03T12:21:49.000-07:00","lastPublishTime":"2005-08-03T12:21:49.000-07:00","metrics":{"__typename":"MessageMetrics","views":191},"visibilityScope":"PUBLIC","placeholder":false,"showMoveIndicator":false,"originalMessageForPlaceholder":null,"isEscalated":null,"solution":false,"replies":{"__typename":"MessageConnection","pageInfo":{"__typename":"PageInfo","hasNextPage":false,"endCursor":null,"hasPreviousPage":false,"startCursor":null},"edges":[]},"customFields":[],"attachments":{"__typename":"AttachmentConnection","edges":[],"pageInfo":{"__typename":"PageInfo","hasNextPage":false,"endCursor":null,"hasPreviousPage":false,"startCursor":null}}},"CachedAsset:text:en_US-components/community/NavbarDropdownToggle-1751558338022":{"__typename":"CachedAsset","id":"text:en_US-components/community/NavbarDropdownToggle-1751558338022","value":{"ariaLabelClosed":"Press the down arrow to open the menu"},"localOverride":false},"CachedAsset:text:en_US-components/messages/EscalatedMessageBanner-1751558338022":{"__typename":"CachedAsset","id":"text:en_US-components/messages/EscalatedMessageBanner-1751558338022","value":{"escalationMessage":"Escalated to Salesforce by {username} on {date}","viewDetails":"View Details","modalTitle":"Case Details","escalatedBy":"Escalated by: ","escalatedOn":"Escalated on: ","caseNumber":"Case Number: ","status":"Status: ","lastUpdateDate":"Last Update: ","automaticEscalation":"automatic escalation","anonymous":"Anonymous"},"localOverride":false},"CachedAsset:text:en_US-components/users/UserLink-1751558338022":{"__typename":"CachedAsset","id":"text:en_US-components/users/UserLink-1751558338022","value":{"authorName":"View Profile: {author}","anonymous":"Anonymous"},"localOverride":false},"CachedAsset:text:en_US-shared/client/components/users/UserRank-1751558338022":{"__typename":"CachedAsset","id":"text:en_US-shared/client/components/users/UserRank-1751558338022","value":{"rankName":"{rankName}","userRank":"Author rank {rankName}"},"localOverride":false},"CachedAsset:text:en_US-components/messages/MessageTime-1751558338022":{"__typename":"CachedAsset","id":"text:en_US-components/messages/MessageTime-1751558338022","value":{"postTime":"Published: {time}","lastPublishTime":"Last Update: {time}","conversation.lastPostingActivityTime":"Last posting activity time: {time}","conversation.lastPostTime":"Last post time: {time}","moderationData.rejectTime":"Rejected time: {time}"},"localOverride":false},"CachedAsset:text:en_US-components/messages/MessageSolvedBadge-1751558338022":{"__typename":"CachedAsset","id":"text:en_US-components/messages/MessageSolvedBadge-1751558338022","value":{"solved":"Solved"},"localOverride":false},"CachedAsset:text:en_US-components/messages/MessageSubject-1751558338022":{"__typename":"CachedAsset","id":"text:en_US-components/messages/MessageSubject-1751558338022","value":{"noSubject":"(no subject)"},"localOverride":false},"CachedAsset:text:en_US-components/messages/MessageBody-1751558338022":{"__typename":"CachedAsset","id":"text:en_US-components/messages/MessageBody-1751558338022","value":{"showMessageBody":"Show More","mentionsErrorTitle":"{mentionsType, select, board {Board} user {User} message {Message} other {}} No Longer Available","mentionsErrorMessage":"The {mentionsType} you are trying to view has been removed from the community.","videoProcessing":"Video is being processed. Please try again in a few minutes.","bannerTitle":"Video provider requires cookies to play the video. Accept to continue or {url} it directly on the provider's site.","buttonTitle":"Accept","urlText":"watch"},"localOverride":false},"CachedAsset:text:en_US-components/messages/MessageCustomFields-1751558338022":{"__typename":"CachedAsset","id":"text:en_US-components/messages/MessageCustomFields-1751558338022","value":{"CustomField.default.label":"Value of {name}"},"localOverride":false},"CachedAsset:text:en_US-components/messages/MessageReplyButton-1751558338022":{"__typename":"CachedAsset","id":"text:en_US-components/messages/MessageReplyButton-1751558338022","value":{"repliesCount":"{count}","title":"Reply","title@board:BLOG@message:root":"Comment","title@board:TKB@message:root":"Comment","title@board:IDEA@message:root":"Comment","title@board:OCCASION@message:root":"Comment"},"localOverride":false},"CachedAsset:text:en_US-components/messages/MessageListMenu-1751558338022":{"__typename":"CachedAsset","id":"text:en_US-components/messages/MessageListMenu-1751558338022","value":{"postTimeAsc":"Oldest","postTimeDesc":"Newest","kudosSumWeightAsc":"Least Liked","kudosSumWeightDesc":"Most Liked","sortTitle":"Sort By","sortedBy.item":" { itemName, select, postTimeAsc {Oldest} postTimeDesc {Newest} kudosSumWeightAsc {Least Liked} kudosSumWeightDesc {Most Liked} other {}}"},"localOverride":false},"CachedAsset:text:en_US-components/messages/AcceptedSolutionButton-1751558338022":{"__typename":"CachedAsset","id":"text:en_US-components/messages/AcceptedSolutionButton-1751558338022","value":{"accept":"Mark as Solution","accepted":"Marked as Solution","errorHeader":"Error!","errorAdd":"There was an error marking as solution.","errorRemove":"There was an error unmarking as solution.","solved":"Solved","topicAlreadySolvedErrorTitle":"Solution Already Exists","topicAlreadySolvedErrorDesc":"Refresh the browser to view the existing solution"},"localOverride":false},"CachedAsset:text:en_US-components/messages/MessageView/MessageViewCard-1751558338022":{"__typename":"CachedAsset","id":"text:en_US-components/messages/MessageView/MessageViewCard-1751558338022","value":{"gotoParent":"Go to parent {name}"},"localOverride":false},"CachedAsset:text:en_US-components/messages/MessageView/MessageViewInline-1751558338022":{"__typename":"CachedAsset","id":"text:en_US-components/messages/MessageView/MessageViewInline-1751558338022","value":{"bylineAuthor":"{bylineAuthor}","bylineBoard":"{bylineBoard}","anonymous":"Anonymous","place":"Place {bylineBoard}","gotoParent":"Go to parent {name}"},"localOverride":false},"CachedAsset:text:en_US-shared/client/components/common/Pager/PagerLoadMore-1751558338022":{"__typename":"CachedAsset","id":"text:en_US-shared/client/components/common/Pager/PagerLoadMore-1751558338022","value":{"loadMore":"Show More"},"localOverride":false},"CachedAsset:text:en_US-components/customComponent/CustomComponent-1751558338022":{"__typename":"CachedAsset","id":"text:en_US-components/customComponent/CustomComponent-1751558338022","value":{"errorMessage":"Error rendering component id: {customComponentId}","bannerTitle":"Video provider requires cookies to play the video. Accept to continue or {url} it directly on the provider's site.","buttonTitle":"Accept","urlText":"watch"},"localOverride":false},"CachedAsset:text:en_US-shared/client/components/users/UserAvatar-1751558338022":{"__typename":"CachedAsset","id":"text:en_US-shared/client/components/users/UserAvatar-1751558338022","value":{"altText":"{login}'s avatar","altTextGeneric":"User's avatar"},"localOverride":false},"CachedAsset:text:en_US-shared/client/components/ranks/UserRankLabel-1751558338022":{"__typename":"CachedAsset","id":"text:en_US-shared/client/components/ranks/UserRankLabel-1751558338022","value":{"altTitle":"Icon for {rankName} rank"},"localOverride":false},"CachedAsset:text:en_US-components/tags/TagView/TagViewChip-1751558338022":{"__typename":"CachedAsset","id":"text:en_US-components/tags/TagView/TagViewChip-1751558338022","value":{"tagLabelName":"Tag name {tagName}"},"localOverride":false},"CachedAsset:text:en_US-shared/client/components/nodes/NodeIcon-1751558338022":{"__typename":"CachedAsset","id":"text:en_US-shared/client/components/nodes/NodeIcon-1751558338022","value":{"contentType":"Content Type {style, select, FORUM {Forum} BLOG {Blog} TKB {Knowledge Base} IDEA {Ideas} OCCASION {Events} other {}} icon"},"localOverride":false}}}},"page":"/forums/ForumMessagePage/ForumMessagePage","query":{"boardId":"technicalforum","messageSubject":"http-response-problems-with-multiple-requests","messageId":"258888"},"buildId":"3XH0qYWYCnEYycuN5W4S8","runtimeConfig":{"buildInformationVisible":false,"logLevelApp":"info","logLevelMetrics":"info","surveysEnabled":true,"openTelemetry":{"clientEnabled":false,"configName":"f5","serviceVersion":"25.4.0","universe":"prod","collector":"http://localhost:4318","logLevel":"error","routeChangeAllowedTime":"5000","headers":"","enableDiagnostic":"false","maxAttributeValueLength":"4095"},"apolloDevToolsEnabled":false,"quiltLazyLoadThreshold":"3"},"isFallback":false,"isExperimentalCompile":false,"dynamicIds":["components_seo_QAPageSchema","components_customComponent_CustomComponent","components_community_Navbar_NavbarWidget","components_community_Breadcrumb_BreadcrumbWidget","components_messages_TopicWithThreadedReplyListWidget","components_featured_content_FeaturedContentWidget","components_messages_MessageListForNodeByRecentActivityWidget","components_messages_RelatedContentWidget","components_messages_MessageView_MessageViewStandard","components_messages_ThreadedReplyList","components_customComponent_CustomComponentContent_TemplateContent","components_messages_EscalatedMessageBanner","shared_client_components_common_List_UnstyledList","components_messages_MessageView","shared_client_components_common_List_GridList","components_messages_MessageView_MessageViewCard","components_messages_MessageView_MessageViewInline","shared_client_components_common_Pager_PagerLoadMore","components_customComponent_CustomComponentContent_HtmlContent","shared_client_components_common_List_UnwrappedList","components_tags_TagView","components_tags_TagView_TagViewChip","components_customComponent_CustomComponentContent_CustomComponentScripts"],"appGip":true,"scriptLoader":[]}
/discussions/technicalforum/enable-debug-on-specific-health-monitor/177802
