Forum Discussion
AlvinNG_GTI
Altostratus
AltostratusHow to configure the AOM for rSeries hardware appliance
Hello, As I encountered something when I want to shutdown the rSeries hardware appliance with F5OS 1.3.1 by CLI "halt". The process as smooth and shown "The system was halted". But I tried to Power ...
TMD
Nimbostratus
NimbostratusIf the power was turned off with the "halt -p" command, you should be able to power on using the touch panel.
Please note K22954168.
https://support.f5.com/csp/article/K22954168
AlvinNG_GTIAltostratus
AltostratusHi TMD,
Thanks for your sharing.
Let me try it in my rSeries appliance. If it is fine, I will use this method rather than configure AOM.
SInce my concern as no any respond to power on the appliance from touch screen before, and require to unplug and re-plug the power pord action. That make me create the post to discuss how configure the AOM on rSeries.
Thanks and Best Regards,
Alvin Ng