Forum Discussion
unavailable
Cirrus
CirrusHigh availability on big ip 2600 device
HI Team, recently for a customer, I need to configure high availability for a big ip 2600 but, when i try to connect directly the interface "high available" dedicated on the device, no led appears...
Hi,
ok, its an rSeries device. This failover port has no functionality on rSeries.
You need to configure tenants upon f5os. The HA will be built then from tenant to tenant. There is no bare metal installation anymore on rSeries.
Keep in mind you need 15.1.x or 17.1.x tmos release for the tenants. v16 is not supported on rSeries.
unavailableCirrus
CirrusHi Marcus,
many thanks for your reply.
I attached at this maio screen about the device that I need to configure.
As you can see in the device there is a failover nic ( i have indicated it by using red arrow ) that is not "visible" in the system and I would like to known, if for configuring high availability I need to use another nic and I have not consider the failover nic.
Many thanks in advanced for your coop.
Awaitng your news.
Rgdsm
Marcus-f5
Employee
EmployeeHi,
ok, its an rSeries device. This failover port has no functionality on rSeries.
You need to configure tenants upon f5os. The HA will be built then from tenant to tenant. There is no bare metal installation anymore on rSeries.
Keep in mind you need 15.1.x or 17.1.x tmos release for the tenants. v16 is not supported on rSeries.
- unavailable
Hi Marcus,
many thanks for your explanation; now everything is more clear.
Thanks,