Forum Discussion
HA config sync issue in lab
"NTP not configured on device 10.3.0.146 - within a trust"
Make sure that you have NTP configured and in sync.
https://support.f5.com/csp/article/K10240
- cciehemant_3007Dec 24, 2018
Nimbostratus
Thanks for help!!
But both these virtual appliances are on same VM so I assume time is in sync. I am currently unable to add internet connectivity to my appliances. Is defining NTP is mandatory?
Thanks Hemant
- Raman_KaushikDec 24, 2018Ret. Employee
Your configuration synchronization (ConfigSync) operation may not function properly if the network time protocol (NTP) server is not configured on all the devices in a device group.
Configuring an NTP server is required for all device group members. If a BIG-IP system with no defined NTP server is added to a device group, the device group members may fail to synchronize their configuration, and the system in which no NTP server is configured will log the listed error message.
Refer--->https://support.f5.com/csp/article/K51323327
- cciehemant_3007Dec 24, 2018
Nimbostratus
Ok, so I have now defined external NTP servers in both the device but problem remains same.
Device trust group remains in sync where as failover group is not able to sync.
Below are the logs from current active.
Mon Dec 24 11:40:00 IST 2018noticebigip1mcpd[4237]0107168eUnable to do incremental sync, reverting to full load for device group /Common/device-group-failover-2c1fa5e3ab07 device %cmi-mcpd-peer-/Common/bigip2.test.com from commit id { 30 6638437165593595024 /Common/bigip2.test.com } to commit id { 731 6638437410619421304 /Common/bigip1.test.com }. Mon Dec 24 11:40:05 IST 2018noticebigip1mcpd[4237]0107168eUnable to do incremental sync, reverting to full load for device group /Common/device-group-failover-2c1fa5e3ab07 device %cmi-mcpd-peer-/Common/bigip2.test.com from commit id { 30 6638437165593595024 /Common/bigip2.test.com } to commit id { 731 6638437410619421304 /Common/bigip1.test.com }. Mon Dec 24 11:40:40 IST 2018noticebigip1mcpd[4237]0107168eUnable to do incremental sync, reverting to full load for device group /Common/device-group-failover-2c1fa5e3ab07 device %cmi-mcpd-peer-/Common/bigip2.test.com from commit id { 30 6638437165593595024 /Common/bigip2.test.com } to commit id { 731 6638437410619421304 /Common/bigip1.test.com }. Mon Dec 24 11:40:57 IST 2018noticebigip1mcpd[4237]0107168eUnable to do incremental sync, reverting to full load for device group /Common/device-group-failover-2c1fa5e3ab07 device %cmi-mcpd-peer-/Common/bigip2.test.com from commit id { 30 6638437165593595024 /Common/bigip2.test.com } to commit id { 731 6638437410619421304 /Common/bigip1.test.com }. Mon Dec 24 11:41:01 IST 2018noticebigip1mcpd[4237]0107168eUnable to do incremental sync, reverting to full load for device group /Common/device-group-failover-2c1fa5e3ab07 device %cmi-mcpd-peer-/Common/bigip2.test.com from commit id { 30 6638437165593595024 /Common/bigip2.test.com } to commit id { 731 6638437410619421304 /Common/bigip1.test.com }.
Recent Discussions
Related Content
* Getting Started on DevCentral
* Community Guidelines
* Community Terms of Use / EULA
* Community Ranking Explained
* Community Resources
* Contact the DevCentral Team
* Update MFA on account.f5.com