Forum Discussion
Nikson_M
Cirrus
CirrusGTM not detecting the service as up.
Folks, We have recently provisioned the GTM module in one of our VE device. We wanted to configure a test environment here. The VE had the valid licenses for the GTM. However, the server show...
You can't just have anything as the Prober Pool Member. It has to be the server for the GTM. Do these steps exactly:
- Create Server for the GTM. So the device that you sent this screenshot from, we'll pretend it's called f5gtm1.com. You'd create a server named f5gtm1. This server will be BIG-IP System (Single). You need to give it an Address, Translation, and Data Center. Leave Virtual Server Discover Disabled.
- Then create Prober Pool.
Nikson_MCirrus
CirrusWe have not created a prober pool yet, so is that the first requirement?
In this case this GTM is in US and the server which are added to it are in UK.
How do I approach this in my case?
DanS92Cirrus
CirrusThe only thing that will be in the Prober Pool is the server you create for the GTM.
For the location, you can create separate Data Centers for each location. Then you attach a Data Center and Prober Pool to each Server you create. This gives you the ability to enable and disable entire Data Centers with 1 click. So I'd create a UK Data Center.
I'm not 100% sure what best practices are for Prober Pools in your case, but I think you'd still just have one Prober Pool for each GTM, and one Data Center for each actual location. Then each Data Center needs a Prober Pool attached, and each Prober Pool needs a Server attached.