firepass network access to corporate VLAN

It does not look like it.

 

 

Log on to your Firepass admin interface then go to Network Access -> Global settings -> and click "Help" to see the help text for this topic. It is "Deciding on NAPT or virtual subnet".

 

 

The help text indicates that you can turn off NAPT, but the Firepass won't simply bridge the Network Access users onto your corporate LAN. If you use the same address pool for the Firepass as you have on your LAN, you will have problems. You could on the other hand assign a new subnet to Network Access users and allow access to the LAN from that new subnet.