Forum Discussion
ajayreddy_16066
Nimbostratus
Nimbostratusf5 tcp parameters
Hello All,
I have issue where I see no response from f5 VIP(SYN_ACK) to client SYN. Per my understanding, f5 creates session one towards client and another session with pool member. I have taken...
Prince
Altostratus
AltostratusIf SNAT is not involved, filtering the packet capture as below will give you the picture of communication either side.
ip.src == SRC IP and ip.dst == VS_IP
ip.src == SRC IP and ip.dst == POOL_Member_IP
Look for communication for the destination port you are interested in.
Since it is STD VS, 3 way handshake will first happen between client and F5 and then F5 will initiate a 3 way handshake with server