Forum Discussion
Richard_22613
Nimbostratus
NimbostratusF5 Lync iApp with Cisco firewalls
I have configured the Lync iApp on a F5 LTM in our DMZ behind a Cisco firewall.
The client AV traffic goes through the firewall, hits the F5, which sends it on to one of the edge servers (in the...
Richard, did you happen to configure the default gateway on the Edge servers' external interfaces to use the self-IP address of the BIG-IP, and set up a default route on the BIG-IP that points to the firewall?
Also, you would need a forwarding virtual server to receive internet-bound traffic from the Edge servers.